标题: HPUX的zone set是什么概念，如何修改？ [打印本页] 作者: ktrudger 时间: 2009-12-11 15:45 标题: HPUX的zone set是什么概念，如何修改？ Hi All,
Thanks for your kind co-operation and timely reply.
I have installed latest patches of Fibre channel and SCSI cumulative But no luck.
Problem solved by modifying zone set configuration.
old zone config:
===============
All hpux server ports and EVA ports into HPUXzone_disk zone set
All hpux server ports and MSL-NSR port info HPUX backup_tape zone set.
Modification config
===================
removed the problematic system from above zone set and created new two zones set
problemtic serverport and EVA port into zone set1
problemtic serverport and MSL-NSR port into
zone set2
now ioscan works fine.
unfortunatly we didn't suspect this at first time due to all other servers were working fine.(mix of PA and IA 11.23 server on same zone sets)
Anyway thanks for all who share their experiences on this problem.
这段看不懂，请高手指点下！作者: leelangco 时间: 2009-12-11 15:45
不知道是你自己在提问还是看到别人的帖子，遇到不懂的地方拿过来问。
zone set是SAN交换机上做的作者: 小型机88 时间: 2009-12-11 17:01
set_parms timezone作者: ktrudger 时间: 2009-12-11 17:18
old zone config:
===============
All hpux server ports and EVA ports into HPUXzone_disk zone set
All hpux server ports and MSL-NSR port info HPUX backup_tape zone set.
Modification config
===================
removed the problematic system from above zone set and created new two zones set
problemtic serverport and EVA port into zone set1
problemtic serverport and MSL-NSR port into
zone set2
不对吧？我怎么看不到类似上面“old zone config”的信息？
如何配置为和下面一样的呢？作者: lbseraph 时间: 2009-12-13 12:55
晕，人家是在SAN switch上面划zone而已吧~~