标题: IBM p650启动时面板显示E1AE [打印本页] 作者: michael.chen 时间: 2010-05-27 13:28 标题: IBM p650启动时面板显示E1AE 查手册，
E1AE: System booted to multiboot menu via NVRAM settings
Maybe your system bootlist is bad,
you can select the boot image manually via your console
连上机器串口，下面是操作步骤：
.-------------------------------------.
| INVALID ENTRY ! |
| Press any key to continue.......... |
`-------------------------------------'
pSeries Firmware
Version RG040322_d75e03_sfw136
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
1. Select Install or Boot Device
2. Configure Boot Device Order
3. Multiboot Startup <ON>
X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:1
pSeries Firmware
Version RG040322_d75e03_sfw136
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Select Device Type
1. Diskette
2. Tape
3. CD/DVD
4. IDE
5. Hard Drive
6. Network
7. List all Devices
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:5
pSeries Firmware
Version RG040322_d75e03_sfw136
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Select Media Type
1. SCSI
2. SSA
3. SAN
4. IDE
5. ISA
6. List All Devices
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:6
pSeries Firmware
Version RG040322_d75e03_sfw136
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Select Device
Device Current Device
Number Position Name
1. - Diskette
2. - Ethernet ( loc=Integ:U0.1-P2/E1 )
3. - Ethernet ( loc=5:U0.1-P2-I5/E1 )
4. - Ethernet ( loc=4:U0.1-P2-I4/E1 )
5. 1 SCSI CD-ROM ( loc=Integ:U0.1-P2/Z1-A1,0 )
6. - SCSI 146 GB Harddisk ( loc=Integ:U0.1-P2/Z1-A8,0 )
7. - SCSI 146 GB Harddisk ( loc=Integ:U0.1-P2/Z1-A9,0 )
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:6
pSeries Firmware
Version RG040322_d75e03_sfw136
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Select Task
1. Information
2. Normal Mode Boot
3. Service Mode Boot
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:2
pSeries Firmware
Version RG040322_d75e03_sfw136
SMS 1.3 (c) Copyright IBM Corp. 2000,2003 All rights reserved.
-------------------------------------------------------------------------------
Are you sure you want to exit System Management Services?
1. Yes
2. No
X = eXit System Management Services
-------------------------------------------------------------------------------
Type the number of the menu item and press Enter or select Navigation Key:1
STARTING SOFTWARE
PLEASE WAIT...
\
Elapsed time since release of system processors: 28 mins 8 secs
-------------------------------------------------------------------------------
Welcome to AIX.
boot image timestamp: 06:56 12/29
The current time and date: 02:04:48 05/27/2010
number of processors: 4 size of memory: 8192Mb
boot device: /pci@400000000111/pci@2/scsi@1/sd@8,0
closing stdin and stdout...
-------------------------------------------------------------------------------
******* Please define the System Console. *******
Type a 1 and press Enter to use this terminal as the
system console.作者: yddll 时间: 2010-05-27 13:43
按1并回车
