Chinaunix

标题: IBM x346 PCI 接口的一点问题 [打印本页]

作者: Blue娃娃 时间: 2009-06-01 18:36
标题: IBM x346 PCI 接口的一点问题
想知道IBM x346 server的PCI接口是PCI-X还是PCI-E ??

用了命令:
# lspci -v

02:00.0 PCI bridge: Intel Corp.: Unknown device 0329 (rev 09) (prog-if 00 [Normal decode])
      Flags: bus master, fast devsel, latency 0
      Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
      Capabilities: [44] #10 [0071]
      Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
      Capabilities: [6c] Power Management version 2
      Capabilities: [d8] PCI-X non-bridge device.

02:00.2 PCI bridge: Intel Corp.: Unknown device 032a (rev 09) (prog-if 00 [Normal decode])
      Flags: bus master, fast devsel, latency 0
      Bus: primary=02, secondary=04, subordinate=04, sec-latency=64
      Capabilities: [44] #10 [0071]
      Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
      Capabilities: [6c] Power Management version 2
      Capabilities: [d8] PCI-X non-bridge device.

这样的输出表示是PCI-X的接口么? 谢谢大家指教.

作者: Blue娃娃 时间: 2009-06-02 12:33
我自己查到了，可以用DSA的report看到，IBM x346的服务器是PCI-X的，IBM x3650是PCI-E，下面的信息就是DSA输出的一个例子：

Slot Type Length Data Width Hot-Plug Usage Status Voltage
PCI Slot 1 PCI-X Long 64 bits false Available OK 3.3V
PCI Slot 2 PCI-X Long 64 bits false Available OK 3.3V
PCI Slot 3 PCI-X Long 64 bits false Available OK 3.3V
PCI Slot 4 PCI-X Long 64 bits false In Use OK 3.3V

作者: kns1024wh 时间: 2009-06-03 21:15
标题: 回复 #2 Blue娃娃的帖子
是的显示的这个是正确的信息

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)