标题: 关于wvdial的问题 [打印本页] 作者: areswry 时间: 2009-01-07 21:46 标题: 关于wvdial的问题 wvdialconf /etc/wvdial.conf
运行上面的命令,系统会自动检测MODEM,然后将波特率什么的保存在/etc/wvdial.conf下面吧。
可我运行完之后,wvdialconf认不到我的MODEM:
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
[root@localhost etc]# wvdialconf /etc/wvdial.conf
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2 S3
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
我的MODEM是一款GRPS 无线MODEM,我已经在MINICOM下面试了AT指令都是通的。就是说MINICOM 是可以认到我的MODEM,但wvdialconf怎么会认不到呢。作者: kns1024wh 时间: 2009-01-07 23:18 标题: 回复 #1 areswry 的帖子 协议不匹配