Chinaunix

标题: xorg.conf（存档） [打印本页]

作者: dutbunny 时间: 2008-05-18 00:31
标题: xorg.conf（存档）
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver  "kbd"
Option  "CoreKeyboard"
Option  "XkbRules" "xorg"
Option  "XkbModel" "pc105"
Option  "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver  "mouse"
Option  "CorePointer"
Option  "Device"  "/dev/input/mice"
Option  "Protocol"  "ImPS/2"
Option  "ZAxisMapping"  "4 5"
Option  "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver  "wacom"
Identifier "stylus"
Option  "Device" "/dev/input/wacom"
Option  "Type"  "stylus"
Option  "ForceDevice" "ISDV4"  # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver  "wacom"
Identifier "eraser"
Option  "Device" "/dev/input/wacom"
Option  "Type"  "eraser"
Option  "ForceDevice" "ISDV4"  # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver  "wacom"
Identifier "cursor"
Option  "Device" "/dev/input/wacom"
Option  "Type"  "cursor"
Option  "ForceDevice" "ISDV4"  # Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc Radeon RV200 QW [Radeon 7500]"
Driver  "ati"
BusID  "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "FT770"
Option  "DPMS"
  HorizSync    30-72
VertRefresh    50-160
EndSection

Section "Screen"
Identifier "Default Screen"
Device  "ATI Technologies Inc Radeon RV200 QW [Radeon 7500]"
Monitor  "FT770"
DefaultDepth 24
SubSection "Display"
  Depth  1
  Modes  "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
  Depth  4
  Modes  "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
  Depth  8
  Modes  "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
  Depth  15
  Modes  "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
  Depth  16
  Modes  "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
  Depth  24
  Modes  "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen  "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice    "stylus" "SendCoreEvents"
InputDevice    "cursor" "SendCoreEvents"
InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

#ctrl+alt+backspace重启GUI界面

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u1/48222/showart_692416.html

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)