Chinaunix

标题: KNOPPIX５．１１不能识别SATA盘问题。 [打印本页]

作者: zsn 时间: 2007-12-01 17:25
标题: KNOPPIX５．１１不能识别SATA盘问题。
OS'  Redhad Linux 9 vmlinuz-2.4.20smp3
硬盘  DiamondMax plus 80G SATA
      DiamondMax plus 80G SATA  RAID

我的系统出现了问题错误信息如下‘
mkrootdev: lable / not found
mount:error 2 mounting ext3
pivotroot :pivot-root (/sysroot, /sysroot /initrd) failed:2
umount /initrd/proc failed:2
Freeing unused kerne memory:156freed
Kerne panic No init found  Try passing init = option to kernel

于是我想用KNOPPIX５．１１来MOUNT硬盘进行修复，但是在KNOPPIX竟然不能识别
找到硬盘，求大家帮我想办法来找到硬盘,`多谢

KNOPPIX５．１１下的dmesg 内容‘
scsi 0:0:0:0: Direct-Access    ATA    Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda:<3>ata1: command timeout
ata1: no sense translation for status: 0x40
ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata1: status=0x40 { DriveReady }
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 8
Buffer I/O error on device sda, logical block 1
ata1: command timeout
ata1: no sense translation for status: 0x40
ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata1: status=0x40 { DriveReady }
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 8
Buffer I/O error on device sda, logical block 1
Dev sda: unable to read RDB block 8
ata1: command timeout
ata1: no sense translation for status: 0x40
ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata1: status=0x40 { DriveReady }
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 24
Buffer I/O error on device sda, logical block 3
ata1: command timeout
ata1: no sense translation for status: 0x40
ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata1: status=0x40 { DriveReady }
sd 0:0:0:0: SCSI error: return code = 0x08000002
sda: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 24
Buffer I/O error on device sda, logical block 3
unable to read partition table
sd 0:0:0:0: Attached scsi disk sda
scsi 1:0:0:0: Direct-Access    ATA    Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb:<3>ata2: command timeout
ata2: no sense translation for status: 0x40
ata2: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: status=0x40 { DriveReady }
sd 1:0:0:0: SCSI error: return code = 0x08000002
sdb: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata2: command timeout
ata2: no sense translation for status: 0x40
ata2: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: status=0x40 { DriveReady }
sd 1:0:0:0: SCSI error: return code = 0x08000002
sdb: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata2: command timeout
ata2: no sense translation for status: 0x40
ata2: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: status=0x40 { DriveReady }
sd 1:0:0:0: SCSI error: return code = 0x08000002
sdb: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 0

[ 本帖最后由 zsn 于 2007-12-1 18:27 编辑 ]

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)