Chinaunix

标题: 沒辦法進x-window [打印本页]

作者: xgi0374    时间: 2007-11-14 10:50
标题: 沒辦法進x-window
各位大大~我是suse 新手
今天遇到一個問題,就是我在xorg.conf裡面將depth切換至24bit時,就無法進x-window了,有誰可以幫幫我
我是用asus P5AD2-E的主機版
顯示卡是"XGI Z9"

下面是我的log檔

------------------------------------------------------------------------------------------------------------------------
(II) XGIZ(0): Not using default mode "960x720" (no mode of this name)
(II) XGIZ(0): Not using default mode "832x624" (no mode of this name)
(II) XGIZ(0): Not using default mode "416x312" (no mode of this name)
(II) XGIZ(0): Not using default mode "1152x768" (no mode of this name)
(II) XGIZ(0): Not using default mode "576x384" (no mode of this name)
(II) XGIZ(0): Not using default mode "700x525" (no mode of this name)
(II) XGIZ(0): Not using default mode "700x525" (no mode of this name)
(II) XGIZ(0): Not using default mode "800x512" (no mode of this name)
(II) XGIZ(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) XGIZ(0): Not using default mode "960x720" (no mode of this name)
(II) XGIZ(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) XGIZ(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) XGIZ(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(WW) XGIZ(0): Mode pool is empty
(EE) XGIZ(0): **************************************************
(EE) XGIZ(0):                       ERROR:
(EE) XGIZ(0): No valid modes found
(EE) XGIZ(0):                   END OF MESSAGE
(EE) XGIZ(0): **************************************************
(II) UnloadModule: "xgiz"
(II) UnloadModule: "int10"
(II) UnloadModule: "int10"
(II) UnloadModule: "ddc"
(II) Unloading /usr/X11R6/lib/modules/libddc.so
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.so
(II) UnloadModule: "vbe"
(II) Unloading /usr/X11R6/lib/modules/libvbe.so
(II) UnloadModule: "ramdac"
(II) Unloading /usr/X11R6/lib/modules/libramdac.so
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
         at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

ACPI: Closing device
------------------------------------------------------------------------------------------------------------------------------------
作者: xgi0374    时间: 2007-11-14 10:53
不好意思,忘了寫上os
我是用"SLES10 SP1"




欢迎光临 Chinaunix (http://bbs.chinaunix.net/) Powered by Discuz! X3.2