Chinaunix

标题: 3com 4400与mrtg [打印本页]

作者: cuiy 时间: 2003-11-30 15:19
标题: 3com 4400与mrtg
用3com 4400（四层）交换机连接几十台机器，用mrtg出图时，是否每一台机器都需要开启snmpd服务？
我用3com 自带 3com network supervisor可以察看其他机器的流量图，但是用mrtg时，总是提示：
[root@LOG-AWSTAT root]# /usr/local/mrtg/bin/cfgmaker --global "WorkDir: /usr/local/apache/htdocs/mrtg" --global "Options[_]: growright,bits" --ifref=ip  private@a.a.a.a  --output /etc/mrtg.cfg
--base: Get Device Info on private@a.a.a.a:
SNMP Error:
no response received
SNMPv1_Session (remote host: "a.a.a.a" [a.a.a.a].161)
               community: "private"
               request ID: 418441261
            PDU bufsize: 8000 bytes
                  timeout: 2s
                  retries: 5
                  backoff: 1)
at /usr/local/mrtg/bin/../lib/mrtg2/SNMP_util.pm line 621
SNMPWALK Problem for 1.3.6.1.2.1.1 on private@a.a.a.a::::::v4only
at /usr/local/mrtg/bin/cfgmaker line 775
WARNING: Skipping private@a.a.a.a: as no info could be retreived

--base: Writing /etc/mrtg.cfg

作者: cuiy 时间: 2003-12-01 09:15
标题: 3com 4400与mrtg
结果：不需要每一台机器开启snmpd，只需要交换机上配好了就好了

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)