Linux下iscsi.conf配置文件如何指定只连接一个IP? - Chinaunix

# "DiscoveryAddress" setting. The format for the "DiscoveryAddress" setting is
# a.b.c.d, a.b.c.d:e (where e is a TCP port number), or an instance name. An
# example of these settings would be:
#
DiscoveryAddress=192.168.0.100
#DiscoveryAddress=192.168.0.4
# or
#DiscoveryAddress=10.4.100.1:3260
# or
#DiscoveryAddress=scisrouter1

[root@server bin]# iscsi-ls
*******************************************************************************
SFNet iSCSI Driver Version ...4:0.1.11(12-Jan-2005)
*******************************************************************************
TARGET NAME          : iqn.2002-10.com.infortrend:raid.sn7240686.00
TARGET ALIAS          :
HOST ID                : 2
BUS ID                : 0
TARGET ID             : 0
TARGET ADDRESS       : 192.168.0.100:3260,1
SESSION STATUS       : ESTABLISHED AT Fri Aug  8 05:48:06 CST 2003
SESSION ID             : ISID 00023d000001 TSIH 200
*******************************************************************************
TARGET NAME          : iqn.2002-10.com.infortrend:raid.sn7240686.10
TARGET ALIAS          :
HOST ID                : 3
BUS ID                : 0
TARGET ID             : 0
TARGET ADDRESS       : 192.168.0.101:3260,1
SESSION STATUS       : ESTABLISHED AT Fri Aug  8 05:48:08 CST 2003
SESSION ID             : ISID 00023d000001 TSIH 500
*******************************************************************************
[root@server bin]#