Chinaunix

标题: 关于mrtg支持snmpv2的问题 [打印本页]

作者: hqucocl 时间: 2005-11-29 22:29
标题: 关于mrtg支持snmpv2的问题
因为要监视一台流量超过100m/s的服务器··所以就选择snmp2··
键入的命令： cfgmaker --global 'WorkDir: /var/www/mrtg/hqufile' --global 'Options[_]: bits,growright' --output /etc/mrtg/hqufile/mrtg.cfg --snmp-option=:::::2 --ifdesc=alias --no-down ×@×
返回信息为
--base: snmpget×@×:::::2:v4only for ifHighSpeed.1 ->  Mb/s
--base: snmpget×@×:::::2:v4only for ifHCInOctets.1 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: snmpget ×@×:::::2:v4only for ifHighSpeed.2 ->  Mb/s
--base: snmpget ×@×:::::2:v4only for ifHCInOctets.2 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: snmpget×@×:::::2:v4only for ifHighSpeed.3 ->  Mb/s
--base: snmpget×@×:::::2:v4only for ifHCInOctets.3 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: snmpget ×@×:::::2:v4only for ifHighSpeed.4 ->  Mb/s
--base: snmpget ×@×:::::2:v4only for ifHCInOctets.4 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: Writing /etc/mrtg/hqufile/mrtg.cfg
google查出的信息太少了··只好求助各位了··这到底是什么问题·该怎么解决呢、
大虾们帮帮小弟啊··先谢谢了··

作者: wdongtao 时间: 2005-11-30 10:11
标题: mrtg.cfg 怎么配置的？
贴出来看看

作者: hqucocl 时间: 2005-11-30 10:24
呃？要贴什么？

作者: hqucocl 时间: 2005-11-30 10:57
cfgmaker --global 'WorkDir: /var/www/mrtg/hqufile' --global 'Options[_]: bits,growright' --output /etc/mrtg/hqufile/mrtg.cfg --snmp-option=:::::2 --ifref=ip --no-down  public@192.168.0.1
--base: Get Device Info on  public@192.168.0.1:::::2
--base: Vendor Id:
--base: Populating confcache
--snpo: confcache  public@192.168.0.1:::::2 Descr lo --> 1
--snpo: confcache  public@192.168.0.1:::::2 Descr eth0 --> 2
--snpo: confcache  public@192.168.0.1:::::2 Descr eth1 --> 3
--snpo: confcache  public@192.168.0.1:::::2 Descr sit0 --> 4
--snpo: confcache  public@192.168.0.1:::::2 Type 24 --> 1
--snpo: confcache  public@192.168.0.1:::::2 Type 6 --> 2
--snpo: confcache  public@192.168.0.1:::::2 Type 6 --> 3 (duplicate)
--snpo: confcache  public@192.168.0.1:::::2 Type 131 --> 4
--snpo: confcache  public@192.168.0.1:::::2 Ip 127.0.0.1 --> 1
--snpo: confcache  public@192.168.0.1:::::2 Ip 202.109.210.46 --> 2
--snpo: confcache  public@192.168.0.1:::::2 Ip 192.168.0.1 --> 3
--snpo: confcache  public@192.168.0.1:::::2 Eth  --> 1
--snpo: confcache  public@192.168.0.1:::::2 Eth 00-30-48-72-d9-38 --> 2
--snpo: confcache  public@192.168.0.1:::::2 Eth 00-30-48-72-d9-39 --> 3
--snpo: confcache  public@192.168.0.1:::::2 Eth  --> 4 (duplicate)
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifSpeed
--base: Walking ifHighSpeed
--base: snmpget  public@192.168.0.1:::::2:v4only for ifHighSpeed.1 ->  Mb/s
--base: snmpget  public@192.168.0.1:::::2:v4only for ifHCInOctets.1 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: snmpget  public@192.168.0.1:::::2:v4only for ifHighSpeed.2 ->  Mb/s
--base: snmpget  public@192.168.0.1:::::2:v4only for ifHCInOctets.2 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: snmpget  public@192.168.0.1:::::2:v4only for ifHighSpeed.3 ->  Mb/s
--base: snmpget  public@192.168.0.1:::::2:v4only for ifHCInOctets.3 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: snmpget  public@192.168.0.1:::::2:v4only for ifHighSpeed.4 ->  Mb/s
--base: snmpget  public@192.168.0.1:::::2:v4only for ifHCInOctets.4 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: Writing /etc/mrtg/hqufile/mrtg.cfg

作者: hqucocl 时间: 2005-11-30 13:32
大虾们救救急啊··被这个问题郁闷几天了…………

作者: force 时间: 2005-12-31 15:15
服务器不支持snmpV2吧

作者: bbn9435 时间: 2009-02-06 13:05
标题: 回复 #1 hqucocl 的帖子
修改mrtg的配置文件
找到
noHC[xxx.xxx.xxx.xxx_xxx]: yes
注释掉即可

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)