注意x-win32安全设置里的IP.作者: charly 时间: 2003-01-28 14:37 标题: 请教高手X.win32怎么老连不上去？ 我都快要崩溃了！
你是怎么弄的？作者: cgweb 时间: 2003-01-28 16:32 标题: 请教高手X.win32怎么老连不上去？ 在SERVER输入+XHOST作者: charly 时间: 2003-01-28 17:17 标题: 请教高手X.win32怎么老连不上去？ 没有这个命令啊作者: icflying 时间: 2003-01-28 17:25 标题: 请教高手X.win32怎么老连不上去？ 1. # ntsysv
运行ntsysv命令启用named 、telnet 和 wu_ftpd 服务，禁用httpd 、mysqld、iptables和ipchains 服务和其他一些不需要的服务。
2. # cd /etc/X11/xdm
3. 修改 xdm-config，把下面这行注释掉：
“DisplayManager.requestPort: 0” -->; “!DisplayManager.requestPort: 0”
4. 修改 Xaccess
“#* # any host can get a login window”-->; “* # any host can get a login window”
5. 修改 Xservers
“:0 local /usr/X11R6/bin/X” -->; “#:0 local /usr/X11R6/bin/X”
6. # xdm -debug 1
7. reboot作者: icflying 时间: 2003-01-28 17:27 标题: 请教高手X.win32怎么老连不上去？ 如果还不行
那就要看你的linux网络连接有没有问题作者: charly 时间: 2003-01-29 12:14 标题: 请教高手X.win32怎么老连不上去？ 网络连接肯定没有问题，ping内网、外网都没问题，firewall都已经关掉
在X.win32里面，选择XDMCP mode—>;query，然后在hostname中输入windows的IP地址192.168.168.29，在session flag里面选中AutoRestart和ShowMessage，在下拉菜单里选择Default
# more xdm-config
! $XConsortium: xdm-conf.cpp /main/3 1996/01/15 15:17:26 gildea $
! $XFree86: xc/programs/xdm/config/xdm-conf.cpp,v 1.6 2000/01/31 19:33:43 dawes Exp $
DisplayManager.errorLogFile: /var/log/xdm-errors
DisplayManager.pidFile: /var/run/xdm-pid
DisplayManager.keyFile: /etc/X11/xdm/xdm-keys
DisplayManager.servers: /etc/X11/xdm/Xservers
DisplayManager.accessFile: /etc/X11/xdm/Xaccess
DisplayManager.willing: su nobody -c /etc/X11/xdm/Xwilling
! All displays should use authorization, but we cannot be sure
! X terminals will be configured that way, so by default
! use authorization only for local displays :0, :1, etc.
DisplayManager._0.authorize: true
DisplayManager._1.authorize: true
! The following three resources set up display :0 as the console.
DisplayManager._0.setup: /etc/X11/xdm/Xsetup_0
DisplayManager._0.startup: /etc/X11/xdm/GiveConsole
DisplayManager._0.reset: /etc/X11/xdm/TakeConsole
!
DisplayManager*resources: /etc/X11/xdm/Xresources
DisplayManager*session: /etc/X11/xdm/Xsession
DisplayManager*authComplain: false
! SECURITY: do not listen for XDMCP or Chooser requests
! Comment out this line if you want to manage X terminals with xdm
! DisplayManager.requestPort: 0
# more Xservers
# $XConsortium: Xserv.ws.cpp,v 1.3 93/09/28 14:30:30 gildea Exp $
#
# Xservers file, workstation prototype
#
# This file should contain an entry to start the server on the
# local display; if you have more than one display (not screen),
# you can add entries to the list (one per line). If you also
# have some X terminals connected which do not support XDMCP,
# you can add them here as well. Each X terminal line should
# look like:
# XTerminalName:0 foreign
#
#:0 local /usr/X11R6/bin/X
# more Xaccess
# $XConsortium: Xaccess,v 1.5 91/08/26 11:52:51 rws Exp $
# Access control file for XDMCP connections
# To control Direct and Broadcast access:
# pattern
# To control Indirect queries:
# pattern list of hostnames and/or macros ...
# To use the chooser:
# pattern CHOOSER BROADCAST
# or
# pattern CHOOSER list of hostnames and/or macros ...
# To define macros:
# %name list of hosts ...
# The first form tells xdm which displays to respond to itself.
# The second form tells xdm to forward indirect queries from hosts matching
# the specified pattern to the indicated list of hosts.
# The third form tells xdm to handle indirect queries using the chooser;
# the chooser is directed to send its own queries out via the broadcast
# address and display the results on the terminal.
# The fourth form is similar to the third, except instead of using the
# broadcast address, it sends DirectQuerys to each of the hosts in the list
# In all cases, xdm uses the first entry which matches the terminal;
# for IndirectQuery messages only entries with right hand sides can
# match, for Direct and Broadcast Query messages, only entries without
# right hand sides can match.
* #any host can get a login window
#
# To hardwire a specific terminal to a specific host, you can
# leave the terminal sending indirect queries to this host, and
# use an entry of the form:
#
#terminal-a host-a
#
# The nicest way to run the chooser is to just ask it to broadcast
# requests to the network - that way new hosts show up automatically.
# Sometimes, however, the chooser can't figure out how to broadcast,
# so this may not work in all environments.
#
* CHOOSER BROADCAST #any indirect host can get a chooser
#
# If you'd prefer to configure the set of hosts each terminal sees,
# then just uncomment these lines (and comment the CHOOSER line above)
# and edit the %hostlist line as appropriate
#
#%hostlist host-a host-b
#* CHOOSER %hostlist #作者: charly 时间: 2003-01-29 17:13 标题: 请教高手X.win32怎么老连不上去？ It says: "XDMCP connection fault "
and I change "! DisplayManager.requestPort: 0"->;" DisplayManager.requestPort: 0" and try again
but still dissuccess
WHY?作者: charly 时间: 2003-02-03 18:09 标题: 请教高手X.win32怎么老连不上去？ 为什么？作者: 孤独的鹰 时间: 2003-02-05 09:27 标题: 请教高手X.win32怎么老连不上去？