Chinaunix
标题:
求4006--S3的配置文件,急!
[打印本页]
作者:
handsen
时间:
2003-01-16 20:59
标题:
求4006--S3的配置文件,急!
各位大虾,现有一台4006--S3带4148模块,要在上面配四个VLAN(1-4),怎样做vlan间路由及控制访问?(vlan1,vlan2可访问vlan3、vlan4、但vlan3、4不能访问1、2),请高手帮忙写出详细配置。在下是新手,show run出来的配置俺大多看不明白,请给出swithc(config)#状态下的配置步骤,谢谢!
作者:
zwei19
时间:
2003-01-21 11:03
标题:
求4006--S3的配置文件,急!
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname bang-rp
!
!
ip subnet-zero
!
!
!
interface Port-channel1
!--- this interface is configured for dot1q routing with native vlan 1 to match supervisor configuration.
no ip redirects
no ip directed-broadcast
hold-queue 300 in
!
interface Port-channel1.2
encapsulation dot1Q 2
ip address 2.2.2.2 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface Port-channel1.3
encapsulation dot1Q 3
ip address 1.1.1.2 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface FastEthernet1
!--- this is the out of band interface that you can use for management
no ip address
no ip directed-broadcast
shutdown
!
interface GigabitEthernet1
ip address 3.3.3.2 255.255.255.0
no ip directed-broadcast
!
interface GigabitEthernet2
no ip address
no ip directed-broadcast
shutdown
!
interface GigabitEthernet3
no ip address
no ip directed-broadcast
no negotiation auto
channel-group 1
!--- both port gig 3 and gig 4 are part of the channel-group 1
!
interface GigabitEthernet4
no ip address
no ip directed-broadcast
no negotiation auto
channel-group 1
!--- both port gig 3 and gig 4 are part of the channel group 1
!
router eigrp 1
passive-interface FastEthernet1
network 1.0.0.0
network 2.0.0.0
network 3.0.0.0
!
ip classless
!
arp 127.0.0.2 0050.732a.f300 ARPA
!
line con 0
transport input none
line aux 0
line vty 0 4
login
!
end
bang-rp#sh cdp nei
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater
Device ID Local Intrfce Holdtme Capability
Platform Port ID
liki Gig 1
160 T S
WS-C3508G-Gig 0/1
Liki is connected to gig 1 on the router. We only see liki from the router, we do not see it from the supervisor.
JAB02380AYG(bang)Port-channel1 148 T S WS-C4003 3/2
JAB02380AYG(bang)Port-channel1 147 T S WS-C4003 3/1
欢迎光临 Chinaunix (http://bbs.chinaunix.net/)
Powered by Discuz! X3.2