fs0:> bcfg boot dump
The boot option list is:
01. Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part1,SigD1B6FB88-AD95-11E0-8002-D6217B60E58/\EFI\HPUX\HPUX.EFI "HP-UX"
02. VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9) mEFI Shell [Built-in]
03. Acpi(HWP0002,0)/Pci(3|0)/Ata(Primary,Master) Internal Bootable DVD
我exit 回到
EFI Boot Manager ver 1.10 [14.62]
OS might use only the primary console set via boot manager or conconfig command
Boot Menu HU-UX 增加的
Internal Bootable DVD
EFI Shell [Built-in]
然后ctrl+b--cm--pc--power off-power on
启动中有下面可能报错
This boot experienced the following problems:
WARNING[1]: Invalid real time clock cleared
WARNING[48]: SAL NVM cleared
WARNING[49]: EFI NVM cleared
Address the warning issues as soon as possible.
Redisplay list with 'info warning' at EFI shell.
EFI Boot Manager ver 1.10 [14.62]
OS might use only the primary console set via boot manager or conconfig command
Boot Menu
Internal Bootable DVD
EFI Shell [Built-in] 少了增加的 HU-UX 谁能帮我分析下吗 我怎么增加不了启动项 我想直接进系统。作者: hetg407 时间: 2011-06-15 08:39
到EFI Boot Manager 直接加就行,也不需要power off作者: zhqing211 时间: 2011-06-15 09:57
直接加是可以加上去的但是也是重新启动后加的哪项就没了!!!!
我是要重启动后直接进入系统 不在先进efi shell 我poweroff 就是想看看可以吗? poweroff powerON 后 加的HP-UX就没了!!!奇怪作者: hetg407 时间: 2011-06-15 10:56
不应该的,在选项中加完,需要保存的,不知道你有这步操作?作者: zhqing211 时间: 2011-06-15 11:21
有这个操作 保存了
EFI Boot Manager ver 1.10 [14.62]
OS might use only the primary console set via boot manager or conconfig command
Boot Menu HU-UX 增加的
Internal Bootable DVD
EFI Shell [Built-in]作者: zhqing211 时间: 2011-06-15 11:32
有这个操作 保存了
EFI Boot Manager ver 1.10 [14.62]
OS might use only the primary console set via boot manager or conconfig command
Boot Menu HU-UX 增加的
Internal Bootable DVD
EFI Shell [Built-in]作者: hetg407 时间: 2011-06-15 11:41
奇怪,我添加boot entry后,再pc off,pc on,新的entry还在的。作者: zhqing211 时间: 2011-06-15 12:06
This boot experienced the following problems:
WARNING[1]: Invalid real time clock cleared
WARNING[48]: SAL NVM cleared
WARNING[49]: EFI NVM cleared
Address the warning issues as soon as possible.
Redisplay list with 'info warning' at EFI shell.
Log Name Entries % Full Latest Timestamped Entry
---------------------------------------------------------------------------
E - System Event 118 14 % 14 Jul 2011 04:52:36
F - Forward Progress 1464 36 % 14 Jul 2011 04:52:36
B - Current Boot 121 40 %
P - Previous Boot 23 7 % 01 Jan 1998 00:00:03
C - Clear All Logs
L - Live Events作者: hetg407 时间: 2011-06-15 14:46
选e
选a
选3作者: zhqing211 时间: 2011-06-15 16:59
sl e a 3
MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >
Alert Level = 2 - Informational
Data Type = 0 - Data field unused
Data = 00 00 00 00 00 00 00 00
_______________________________________________________________________________
Sensor
Number Triplet Data 2 Data 3
------ -------- ------ ------
CF 09:6F:02 FF FF
Decoding as system type: Mount Diablo / Mount Hamilton
Sensor Number : CF - AC Fail [AC Presence]
Sensor Type : 09 = Power Unit
Event type = Assertion event : Sensor-specific assertion event
Keyword = POWER_AC_FAILED
The input power to the supply has failed or gone out of range.
_______________________________________________________________________________作者: lbseraph 时间: 2011-06-24 13:47
MP:CM> ps 的结果是?如果电源都正常,那么底板电池没电的可能性最大。