Chinaunix

标题: the file just loaded does not appear to be executable,? [打印本页]

作者: success_king    时间: 2004-02-11 17:23
标题: the file just loaded does not appear to be executable,?
ok状态,boot cdrom
读了一会光驱后出现:
the file just loaded does not appear to be executable

我的install盘没问题的,前两天在另一台机器还安装过呢。

为什么呢?
作者: metor78    时间: 2004-02-11 17:34
标题: the file just loaded does not appear to be executable,?
光驱,或者把盘擦一下
作者: diag    时间: 2004-02-11 17:42
标题: the file just loaded does not appear to be executable,?
硬盘太大了。
作者: metor78    时间: 2004-02-11 17:43
标题: the file just loaded does not appear to be executable,?
不是吧,猪猪
作者: diag    时间: 2004-02-11 17:49
标题: the file just loaded does not appear to be executable,?
是。

要不就是 BIN 不对。
作者: metor78    时间: 2004-02-11 17:51
标题: the file just loaded does not appear to be executable,?
我遇见过,是光驱不好了!
作者: metor78    时间: 2004-02-11 18:01
标题: the file just loaded does not appear to be executable,?
猪猪,我下班回家了
作者: C.Arthur    时间: 2004-02-11 18:22
标题: the file just loaded does not appear to be executable,?
应该是盘的问题,你再换张盘试一下
作者: diag    时间: 2004-02-11 22:05
标题: the file just loaded does not appear to be executable,?
这个问题我也见过。。

他说了不是盘的问题了。
是他的机器太旧。。硬盘太大。

才报这个错的。VTOC 不对。。
作者: nimysun    时间: 2004-02-11 22:08
标题: the file just loaded does not appear to be executable,?
就像各位大侠所说的那样:要么是光盘太旧,要么是光驱太差。至于硬盘的原因就不大可能了吧?
作者: C.Arthur    时间: 2004-02-11 22:08
标题: the file just loaded does not appear to be executable,?
用INSTALL装行吗,有张驱动盘你记得吗,那个也可以试试
作者: iricyan    时间: 2004-02-11 22:57
标题: the file just loaded does not appear to be executable,?
是要重新安装,还是要修复什么东西呢?
作者: race    时间: 2004-02-11 23:07
标题: the file just loaded does not appear to be executable,?
把你的机器硬件型号和操作系统版本说清楚了
作者: success_king    时间: 2004-02-12 07:33
标题: the file just loaded does not appear to be executable,?
感谢各位老大的关注,不好意思,晚上不在。

U10机器,原配两个9G的ide硬盘,我新换了一个80G的硬盘,就出现这个问题了。想起来了,原来9G硬盘的时候,大概就是用这张光盘安装的。

如果是硬盘太大,有什么解决的办法?
作者: success_king    时间: 2004-02-12 08:41
标题: the file just loaded does not appear to be executable,?
boot cdrom -s可以启动
boot cdrom -r 启动安装程序,开始安装了。

(为了保险,我有加了一个20G的slave ide硬盘,不知和这个有没有关系。)

选了重新分区,拷贝完mini-root等后重新启动

Rebooting with command:boot /pci@1f,0/pci@1,1/ide@3/disk@0,0:b
Boot device:/pci@1f,0/pci@1,1/ide@3/disk@0,0:a File and args: -F cprboot
Boot load failed.
The file just loaded does not appear to be executable.

好像又回到了原地8-(
作者: metor78    时间: 2004-02-12 09:05
标题: the file just loaded does not appear to be executable,?
硬盘跳线!
作者: success_king    时间: 2004-02-12 09:26
标题: the file just loaded does not appear to be executable,?
原来是两个硬盘接在一根线上,线上有标记master和slaver,两个硬盘的跳线都是cable select.

现在我只想接一个80G硬盘,跳成cable select和master都试过了,结果一样。(不过硬盘上标记有两种跳线分别是16heads和15heads,跳的是16,这个应该没什么关系吧)

probe-ide 显示也正确
作者: metor78    时间: 2004-02-12 09:35
标题: the file just loaded does not appear to be executable,?
用你20G的硬盘也会这样吗?
作者: diag    时间: 2004-02-12 09:42
标题: the file just loaded does not appear to be executable,?
不好意思。。。。

给我说对了。。
作者: success_king    时间: 2004-02-12 09:54
标题: the file just loaded does not appear to be executable,?
[quote]原帖由 "metor78"]用你20G的硬盘也会这样吗?[/quote 发表:


刚才换回了一个原来的两个9G硬盘,还是这个问题,我奇了怪了

我再刻光盘去了
作者: metor78    时间: 2004-02-12 09:58
标题: the file just loaded does not appear to be executable,?
猪猪,不见得吧,楼主考虑一下光驱,U10的光驱和普通的IDE光驱可以通用,换一个试试!
作者: diag    时间: 2004-02-12 10:09
标题: the file just loaded does not appear to be executable,?
经验呀。。

我第一次碰到时候也认为是盘坏了。。

折腾了一天。。。。
作者: C.Arthur    时间: 2004-02-12 10:11
标题: the file just loaded does not appear to be executable,?
还是光怕的问题吧
作者: diag    时间: 2004-02-12 10:13
标题: the file just loaded does not appear to be executable,?
VTOC 不认。。

U5 最多认到32GB
作者: metor78    时间: 2004-02-12 10:15
标题: the file just loaded does not appear to be executable,?
原帖由 "success_king" 发表:


刚才换回了一个原来的两个9G硬盘,还是这个问题,我奇了怪了

我再刻光盘去了

但是现在是这样滴
作者: diag    时间: 2004-02-12 10:17
标题: the file just loaded does not appear to be executable,?
没错。是这样。

我才折腾了一天。。

找人要了个原版的。。。0202 的。。还是不成。

安装时候起到 OPENWIN 的时候就出那个错。。。
作者: metor78    时间: 2004-02-12 10:19
标题: the file just loaded does not appear to be executable,?
他现在换回去原来的硬盘了!
作者: diag    时间: 2004-02-12 10:21
标题: the file just loaded does not appear to be executable,?
不知道了。。。

SOLARIS 的水太深。上次折腾了一天。BLADE100 就是因为换个大IDE 硬盘。。。
作者: success_king    时间: 2004-02-12 10:27
标题: the file just loaded does not appear to be executable,?
呵呵,今天我没事,继续折腾

现在准备了一个新光驱,一张rw盘片刻好了install,未完待续
作者: metor78    时间: 2004-02-12 10:29
标题: the file just loaded does not appear to be executable,?
150上我用过80G的盘,没事
作者: diag    时间: 2004-02-12 10:30
标题: the file just loaded does not appear to be executable,?
0S8 吗?

BLADE100 用OS9 80G 也没问题。。
作者: metor78    时间: 2004-02-12 10:35
标题: the file just loaded does not appear to be executable,?
9呀
作者: diag    时间: 2004-02-12 10:37
标题: the file just loaded does not appear to be executable,?
这就对了。。。

9 的VTOC 比8 高。。。

嘿。。

好了这个问题解决了。。。
作者: metor78    时间: 2004-02-12 10:44
标题: the file just loaded does not appear to be executable,?
9还是不错滴
作者: diag    时间: 2004-02-12 10:49
标题: the file just loaded does not appear to be executable,?
好多商业应用不SUPPORT 9 呀。。
作者: metor78    时间: 2004-02-12 10:50
标题: the file just loaded does not appear to be executable,?
支持8的,9也没有问题
作者: success_king    时间: 2004-02-12 11:13
标题: the file just loaded does not appear to be executable,?
忘了说了,两位老大,我的光盘就是sol9的install
作者: metor78    时间: 2004-02-12 11:21
标题: the file just loaded does not appear to be executable,?
呵呵,那就不知道了
作者: diag    时间: 2004-02-12 11:24
标题: the file just loaded does not appear to be executable,?
FAINT 。。

用SOFTWARE 1 装。
作者: success_king    时间: 2004-02-15 10:05
标题: the file just loaded does not appear to be executable,?
原帖由 "C.Arthur" 发表:

ok下set-defaults
reset-all
boot cdrom


看安装指南、刻盘、换光驱、网络安装,折腾了3天,结果依旧。

翻看旧帖,终于找到,真灵!

谢谢各位老大,通过这番折腾,自我感觉好像有点进步了一点
作者: C.Arthur    时间: 2004-02-15 11:33
标题: the file just loaded does not appear to be executable,?
原帖由 "success_king" 发表:


看安装指南、刻盘、换光驱、网络安装,折腾了3天,结果依旧。

翻看旧帖,终于找到,真灵!

谢谢各位老大,通过这番折腾,自我感觉好像有点进步了一点

最后怎么解决的?
作者: success_king    时间: 2004-02-15 14:04
标题: the file just loaded does not appear to be executable,?
原帖由 "C.Arthur" 发表:

最后怎么解决的?


就是这个啦,老大,是以前的旧帖子:

原帖由 "C.Arthur" 发表:

ok下set-defaults
reset-all
boot cdrom


这个帖子:

http://bbs.chinaunix.net/forum/viewtopic.php?t=231684&highlight=光驱
作者: laoxia    时间: 2004-02-15 15:13
标题: the file just loaded does not appear to be executable,?
没什么说的,或是光驱问题,或是介质问题(如光盘有划痕),二者必具其一
作者: metor78    时间: 2004-02-15 15:14
标题: the file just loaded does not appear to be executable,?
obp有问题了吧!有时候也有这样的!
作者: success_king    时间: 2004-02-15 16:26
标题: the file just loaded does not appear to be executable,?
[quote]原帖由 "laoxia"]没什么说的,或是光驱问题,或是介质问题(如光盘有划痕),二者必具其一[/quote 发表:


光驱和光盘都是原来的

中午安装完毕,硬盘升级到80G(master)+20G
作者: C.Arthur    时间: 2004-02-15 23:02
标题: the file just loaded does not appear to be executable,?
呵呵,解决了就好了,看来标题关键字的作用真是大呀
作者: sunwayle    时间: 2006-10-31 11:38
。。。偶也中这一招了,继续折腾。

看旧贴灵不灵哈。。。也是靠搜索的。
作者: sunwayle    时间: 2006-10-31 11:39
U10的机器,,装SOLARIS 8  支持ST80GB的硬盘吗?


哈哈。。最好是 #boot -s cdrom

[ 本帖最后由 sunwayle 于 2006-10-31 12:08 编辑 ]




欢迎光临 Chinaunix (http://bbs.chinaunix.net/) Powered by Discuz! X3.2