AVAILABLE DISK SELECTIONS:
0. c0t0d0 <ST340014A cyl 19156 alt 2 hd 16 sec 255>;
/pci@1f,0/pci@1,1/ide@3/dad@0,0
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted, no defect list found]
Warning: Current Disk has mounted partitions.
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
show - translate a disk address
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
volname - set 8-character volume name
!<cmd>; - execute <cmd>;, then return
quit
format>; p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd>; - execute <cmd>;, then return
quit
partition>; 7
Part Tag Flag Cylinders Size Blocks
7 unassigned wm 19125 - 19155 61.76MB (31/0/0) 126480
Enter partition id tag[unassigned]:
Enter partition permission flags[wm]:
Enter new starting cyl[19125]:
Enter partition size[126480b, 31c, 61.76mb, 0.06gb]: 31c
partition>; l
Ready to label disk, continue? y
partition>;q
format>;q
#作者: chinaren-sun 时间: 2004-03-15 15:34 标题: 装好了系统后怎么更改分区的大小啊？ 如果你要是更改系统分区或择优数据分区，需要使用ufsdump备份，
修改完成以后重新恢复。作者: lly80 时间: 2004-03-15 15:54 标题: 装好了系统后怎么更改分区的大小啊？ 在Enter partition id tag[unassigned]:
Enter partition permission flags[wm]:
Enter new starting cyl[19125]:
Enter partition size[126480b, 31c, 61.76mb, 0.06g]
partition>;l
这之后，怎么就没有reday。。。的了？
然后继续是partition>;。。。。作者: lly80 时间: 2004-03-15 16:00 标题: 装好了系统后怎么更改分区的大小啊？ 在Enter partition id tag[unassigned]:
Enter partition permission flags[wm]:
Enter new starting cyl[19125]:
Enter partition size[126480b, 31c, 61.76mb, 0.06g]
partition>;l 这是输入L吧，然后说：cannot label disk while it has mounted partitions。
是不是不能更改了？作者: pengtao_hlp 时间: 2004-03-15 19:25 标题: 装好了系统后怎么更改分区的大小啊？ 记得保存哦。LABE下。要不就不保存啦作者: fxy9731 时间: 2004-03-15 22:21 标题: 装好了系统后怎么更改分区的大小啊？ 你改的那个分区要umount下来才行