SCSI
Option # ManufacturingPart # Description SubstitutePart # PreviousPart #
X1018A BUY 501-2739 [F] Single-Ended Fast/Wide SCSI/FastEthernet (SunSwift/S) n/a n/a
X2222A BUY 501-5727 [F] Dual Ultra-2 SCSI/Dual FastEthernet PCI Adapter n/a n/a
X4422A BUY 501-6635 [F] Dual Ultra-2 SCSI/Dual GigabitEthernet PCI Adapter n/a n/a
X6758A BUY 375-3057 2 [F] PCI Dual Ultra3 SCSI Host Adapter (LVD) n/a n/a
X9265A BUY 370-6682 [F] Dual Ultra-320 SCSI n/a n/a
2 The necessary drivers (SUNWqus, SUNWqusu, SUNWqusx, & SUNWqusux) and patches for this product are not included in Solaris 8 or 9, but must be downloaded. Please see infodoc 47841 for details.
Document ID Synopsis Date
ID47841 PCI Dual Ultra3 SCSI Host Adapter Requirements 17 Sep 2003
Keyword(s):dual, ultra3
Description Top
Document Body Top
Customers have been installing this Low Voltage Differential card in supported systems not running Solaris[TM] 8 or higher. Check below for the requirements and driver information
1. The minimum operating system is Solaris 8 with the Recommended Patch Cluster.
2. The necessary driver for this HBA is not included in Solaris 8 or Solaris 9, it must be downloaded.
3. The Patch ID is 112697-xx for Solaris 8 and 112706 -xx for Solaris 9
To Download and Install the Driver Packages
1. Log into the host to be connected to the array.
2. Go to www.sun.com/software/download/index.html
3. Click on the A-Z index tab and then select S.
4. Find Sun StorEdge [TM] PCI Dual Ultra3 SCSI Host Adapter v1.0 in that list towards the bottom, and click the link.
5. If you have not already registered, click the Register button, complete the registration form, and click the second Register button when done.
6. Enter your Personal ID and Password, and click the Log In button.
7. On the Legal/License Agreement page, read the License Agreement and click Accept and Continue when done
8. Find the table of files to download for the version of the Solaris operating environment on which you are installing the driver. On the Sun StorEdge[TM] PCI Dual Ultra3 SCSI Host Adapter 1.0 page, find the packages listed under the column heads for one of the following operating environments: Solaris[TM] 8/SPARC Platform or Solaris[TM] 9/SPARC Platform
9. Download the required packages, choosing between 32 bit and 64 bit according to your configuration, and download the README file. For 32-bit configuration download the following two files:
SUNWqus.tar.Z
SUNWqusu.tar.Z
For a 64-bit configuration download the following four files (32 plus 64 bit drivers must be installed) :
SUNWqus.tar.Z
SUNWqusu.tar.Z
SUNWqusx.tar.Z
SUNWqusux.tar.Z
For the README, download the following file:
PCI_HBA_ReadMe.txt
a. Double-click on the link to the desired file.
b. In the Save As dialog box, enter a destination directory for the file, and click the OK button.作者: sqwen 时间: 2004-05-19 16:11 标题: sun StorEdge 3310的驱动哪里有的下？ [quote]原帖由 "东方蜘蛛"]6758的驱动是在网上要下载的！留下mail我给你发一份，sol8和sol9的都有！[/quote 发表：
谢谢了，我的mail是sqwen_cn@163.com作者: 东方蜘蛛 时间: 2004-05-19 16:23 标题: sun StorEdge 3310的驱动哪里有的下？ 发了，查收！作者: nothing 时间: 2004-05-19 16:25 标题: sun StorEdge 3310的驱动哪里有的下？ 我也想要一份，谢谢了！chinese21cn@hotmail.com作者: sqwen 时间: 2004-05-19 16:26 标题: sun StorEdge 3310的驱动哪里有的下？ [quote]原帖由 "东方蜘蛛"]发了，查收！[/quote 发表：
已经收到了，多谢作者: diag 时间: 2004-05-19 16:28 标题: sun StorEdge 3310的驱动哪里有的下？