Chinaunix

标题: RHEL 6字符界面下中文显示乱码(附图) [打印本页]

作者: flyibm 时间: 2011-08-07 17:41
标题: RHEL 6字符界面下中文显示乱码(附图)
大家好，在RHEL 6 字符界面下，所有中文都显示乱码，详见图片。请问怎么解决？还是在字符界面下本来就不能显示中文。谢谢。

作者: snow888 时间: 2011-08-07 21:18
回复 1# flyibm

解决不了。

作者: Mryang8617 时间: 2011-08-07 21:37
默默的用english吧

作者: flyibm 时间: 2011-08-07 22:31
请问这是为什么呢？？？

作者: taojie2000 时间: 2011-08-07 22:54
回复 1# flyibm

作者: flyibm 时间: 2011-08-07 23:20
所有的方法都试了，还是不行。

作者: taojie2000 时间: 2011-08-07 23:43
回复 6# flyibm

你都用什么方法了 ? 我的机器里字符界面显示中文的方法是什么,搜搜看看!

作者: flycentos 时间: 2011-08-07 23:48
没有装全中文支持包。

作者: taojie2000 时间: 2011-08-08 00:15
回复 8# flycentos

init3 字符命令界面啊

作者: flycentos 时间: 2011-08-08 01:11

回复 flycentos

init3 字符命令界面啊
taojie2000 发表于 2011-08-08 00:15

一样的啊。。中文支持和字符集都装上就OK了

作者: taojie2000 时间: 2011-08-08 08:29
回复 10# flycentos

你具体说下来个图

作者: snow888 时间: 2011-08-08 10:42

回复 flyibm
taojie2000 发表于 2011-08-07 22:54

你和他的环境不一样，你的是远程登录的，他的是在主机上控制台上面的，不一样。

作者: taojie2000 时间: 2011-08-08 10:49
回复 12# snow888

不是啊我就是本机的啊

作者: snow888 时间: 2011-08-08 10:55

回复 snow888

不是啊我就是本机的啊
taojie2000 发表于 2011-08-08 10:49

你安装了控制台的汉化包？

俺记得只有一个 zhcon 是可用的啊。

不过那个咚咚俺在 rhel6 的版本上幕友安装过，不知道是否能够使用。

如果你有更好的办法，不防说说哈。

作者: taojie2000 时间: 2011-08-08 11:04
回复 14# snow888

呵呵我就是用的zhcon 临时显示中文 ! 骗骗楼主的!

作者: salmon5 时间: 2011-08-08 11:04
控制台怎么显示中文的，init 5和securecrt ssh是可以，控制台好像默认不行。

作者: lovetide 时间: 2011-08-08 12:08
答案就是：安装 zhcon
http://zhcon.sourceforge.net

作者: flyibm 时间: 2011-08-08 21:59
这么多人回复，谢谢大家哈，我试哈。

作者: flyibm 时间: 2011-08-08 23:47

回复 snow888

呵呵我就是用的zhcon 临时显示中文 ! 骗骗楼主的!
taojie2000 发表于 2011-08-08 11:04

做人要厚道。

作者: taojie2000 时间: 2011-08-08 23:52
回复 19# flyibm

你那软件安装上了没?

作者: hw17 时间: 2011-08-09 10:53
试下 #exprt LANG=ZH_CN.GB18030

作者: flyibm 时间: 2011-08-09 22:20

回复 flyibm

你那软件安装上了没?
taojie2000 发表于 2011-08-08 23:52

正在装。

作者: flyibm 时间: 2011-08-09 22:21

试下 #exprt LANG=ZH_CN.GB18030
hw17 发表于 2011-08-09 10:53

这个不行，最开始就是这个。

作者: flyibm 时间: 2011-08-09 23:12
我下载的是zhcon-0.2.5-to-0.2.6.diff.gz这个文件，请问怎么安排，最好给出详细的安装步骤，谢谢。

作者: taojie2000 时间: 2011-08-09 23:54
回复 24# flyibm

这是个补丁 gzip -d 解开得到个diff文件

你要下载0.2.5 安装包  解压后把补丁 patch  进去!

例:  /zhcon.diff文件    /zhcon包的目录 /下

   patch -p0 < zhcon.diff

   文件名自己修改

   剩下的编译你应该会了....

作者: flyibm 时间: 2011-08-10 23:20
搞了半天，提示要安装gcc，安装gcc，却发现有很多依赖的关系，很多很乱。
想请教下在图形界面下和字符下如何安装gcc，最开始安装系统的时候没有安装，现在想添加，谢谢。

作者: taojie2000 时间: 2011-08-10 23:22
回复 26# flyibm

你要有本地源直接 yum install gcc*

作者: flyibm 时间: 2011-08-10 23:29
yum的本地源是不是要搭建啊？

作者: agloom 时间: 2011-08-12 13:21
用过zhcon但感觉不是那么好使

作者: flyibm 时间: 2011-08-13 18:52
没有试过，所以试用下，看看结果。呵呵。
现在就是先安装YUM，然后再安装GCC等包，安装完成后再安装 zhon，一环套一环。最近在安装YUM，不知道什么地方配置的有问题，不能成功安装其它软件包。我将结果粘上来，请大家给看看是什么地方配置的有问题，谢谢了。

[root@linuxserver yum.repos.d]# yum install samba
Loaded plugins: product-id, refresh-packagekit, subscription-manager
Updating Red Hat repositories.
Setting up Install Process
No package samba available.
Error: Nothing to do
[root@linuxserver yum.repos.d]#

作者: chenyx 时间: 2011-08-13 19:02
yum list | grep sam贴下

作者: flyibm 时间: 2011-08-13 19:21
[root@linuxserver yum.repos.d]# yum list | grep sam
libsamplerate.i686                   0.1.7-2.1.el6          @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
lohit-assamese-fonts.noarch          2.4.3-4.el6             @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
m17n-contrib-assamese.noarch          1.1.10-4.el6             @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
m17n-db-assamese.noarch                1.5.5-1.1.el6          @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
samba-client.i686                      3.5.6-86.el6             @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
samba-common.i686                      3.5.6-86.el6             @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
samba-winbind-clients.i686             3.5.6-86.el6             @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
[root@linuxserver yum.repos.d]#

作者: chenyx 时间: 2011-08-13 19:27
奇怪了,没有samba的服务器端软件.

作者: chenyx 时间: 2011-08-13 19:29
楼主是用dvd作的本地源吗

作者: flyibm 时间: 2011-08-13 20:57
我是用FTP做的，把DVD中的内容拷贝到FTP里面。

作者: chenyx 时间: 2011-08-13 21:01
不应该啊,楼主检查下dvd盘里面samba的rpm,对比下ftp里面的.

作者: flyibm 时间: 2011-08-13 21:06
两个里面的都是一模一样的。

作者: chenyx 时间: 2011-08-13 21:10
不应该,楼主对比下你的光盘和http://mirrors.163.com/centos/6.0/os/i386/Packages/下面关于samba部分包的情况.

作者: flyibm 时间: 2011-08-13 21:16
我用的是RHEL6.1版本，少了这几个文件：
samba-doc-3.5.4-68.el6.i686.rpm
samba-domainjoin-gui-3.5.4-68.el6.i686.rpm
samba-swat-3.5.4-68.el6.i686.rpm
samba-winbind-devel-3.5.4-68.el6.i686.rpm
samba4-4.0.0-23.alpha11.el6.i686.rpm
samba4-devel-4.0.0-23.alpha11.el6.i686.rpm
samba4-libs-4.0.0-23.alpha11.el6.i686.rpm
samba4-pidl-4.0.0-23.alpha11.el6.i686.rpm

作者: chenyx 时间: 2011-08-13 21:24
类似samba-3.5.4-68.el6.i686.rpm的包你的ftp里面有?

作者: flyibm 时间: 2011-08-13 23:08
这个真有。

作者: chenyx 时间: 2011-08-13 23:13
这个,我很怀疑你的dvd的完整性.现在没有环境,应该会有的

作者: flyibm 时间: 2011-08-13 23:40
我把DVD的内容粘上来，你看一下。

samba.jpg (68.11 KB, 下载次数: 42)

作者: chenyx 时间: 2011-08-14 07:46
回复 43# flyibm

第一个就是啊,版本高点而已.163的是centos6.0的

作者: flyibm 时间: 2011-08-14 17:34
好了，已经做出来了。结果粘上来，大家看下还有什么问题没。

[root@linuxserver yum.repos.d]# yum clean all
Loaded plugins: product-id, refresh-packagekit, subscription-manager
Updating Red Hat repositories.
Cleaning repos: yum
Cleaning up Everything
[root@linuxserver yum.repos.d]# yum install samba
Loaded plugins: product-id, refresh-packagekit, subscription-manager
Updating Red Hat repositories.
yum                                                    | 4.0 kB    00:00
yum/primary_db                                        | 2.4 MB    00:00
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package samba.i686 0:3.5.6-86.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
Package       Arch          Version                Repository    Size
================================================================================
Installing:
samba          i686          3.5.6-86.el6          yum          5.0 M

Transaction Summary
================================================================================
Install    1 Package(s)

Total download size: 5.0 M
Installed size: 17 M
Is this ok [y/N]: y
Downloading Packages:
samba-3.5.6-86.el6.i686.rpm                            | 5.0 MB    00:01
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID fd431d51: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
Importing GPG key 0xFD431D51:
Userid : Red Hat, Inc. (release key 2) <security@redhat.com>
Package: redhat-release-server-6Server-6.1.0.2.el6.i686 (@anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
Is this ok [y/N]: y
Importing GPG key 0x2FA658E0:
Userid : Red Hat, Inc. (auxiliary key) <security@redhat.com>
Package: redhat-release-server-6Server-6.1.0.2.el6.i686 (@anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : samba-3.5.6-86.el6.i686                                     1/1
yum/productid                                           | 1.7 kB    00:00
duration: 259(ms)
Installed products updated.

Installed:
  samba.i686 0:3.5.6-86.el6

Complete!
[root@linuxserver yum.repos.d]# rpm -q samba
samba-3.5.6-86.el6.i686
[root@linuxserver yum.repos.d]# yum list | grep samba
samba.i686                            3.5.6-86.el6             @yum
samba-client.i686                   3.5.6-86.el6             @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
samba-common.i686                   3.5.6-86.el6             @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
samba-winbind-clients.i686          3.5.6-86.el6             @anaconda-RedHatEnterpriseLinux-201105101829.i386/6.1
samba-winbind.i686                   3.5.6-86.el6             yum
sblim-cmpi-samba.i686                1.0-1.el6                yum
[root@linuxserver yum.repos.d]#

作者: chenyx 时间: 2011-08-14 17:39
能安装了,说明配置好了.中间有提示key,dvd架设的yum,可以设置gpgcheck=0

作者: flyibm 时间: 2011-08-14 17:50
呵呵，折腾了好几天，终于好了。谢谢大家的指导和帮助，更谢谢chenyx的及时回复和解答，谢谢。
关于KEY，网上说使用rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release和echo /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release >>/etc/yum.repos.d/yum.repo可以使用，没有试过。

作者: flyibm 时间: 2011-08-14 17:52
RHEL 5中是安装createrepo工具，RHEL 6中可以不用安装。

作者: flyibm 时间: 2011-08-17 23:18
呵呵，yum弄好了，现在步入正题，安装zhcon。

作者: flyibm 时间: 2011-08-18 10:19
昨天晚上和今天早上装了，在编译的时候出错了，试了好几次，都是一样的。请大家给看下是什么问题，谢谢。

[root@linuxserver zhcon-0.2.5]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
Linux detected
./configure: line 1902: test: =: unary operator expected
x86 platform detected, compile with VGA support
checking for gawk... (cached) gawk
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking whether byte ordering is bigendian... no
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for library containing strerror... none required
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for an ANSI C-conforming const... yes
checking for signed... yes
checking for inline... inline
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for off_t... yes
checking for size_t... yes
checking for long long... yes
checking for long double... yes
checking for wchar_t... yes
checking for wint_t... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for intmax_t... yes
checking whether printf() supports POSIX/XSI format strings... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... yes
checking whether we are using the GNU C Library 2.1 or newer... yes
checking whether integer division by zero raises SIGFPE... yes
checking for unsigned long long... yes
checking for inttypes.h... yes
checking whether the inttypes.h PRIxNN macros are broken... no
checking for stdint.h... (cached) yes
checking for SIZE_MAX... 4294967295U
checking for stdint.h... (cached) yes
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... /bin/sh: ./config.rpath: No such file or directory
done
checking for ptrdiff_t... yes
checking argz.h usability... yes
checking argz.h presence... yes
checking for argz.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking nl_types.h usability... yes
checking nl_types.h presence... yes
checking for nl_types.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for asprintf... yes
checking for fwprintf... yes
checking for getcwd... yes
checking for getegid... yes
checking for geteuid... yes
checking for getgid... yes
checking for getuid... yes
checking for mempcpy... yes
checking for munmap... yes
checking for putenv... yes
checking for setenv... yes
checking for setlocale... yes
checking for snprintf... yes
checking for stpcpy... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strtoul... yes
checking for tsearch... yes
checking for wcslen... yes
checking for __argz_count... yes
checking for __argz_stringify... yes
checking for __argz_next... yes
checking for __fsetlocking... yes
checking whether _snprintf is declared... no
checking whether _snwprintf is declared... no
checking whether feof_unlocked is declared... yes
checking whether fgets_unlocked is declared... yes
checking whether getc_unlocked is declared... yes
checking for iconv... yes
checking for iconv declaration...
      extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for nl_langinfo and CODESET... yes
checking for LC_MESSAGES... yes
checking for bison... no
checking whether NLS is requested... yes
checking whether included gettext is requested... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for string.h... (cached) yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking termios.h usability... yes
checking termios.h presence... yes
checking for termios.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... (cached) yes
checking for inline... (cached) inline
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for memmove... yes
checking for memset... yes
checking for strchr... yes
checking for forkpty in -lutil... yes
checking for main in -lcurses... no
checking for main in -ldl... yes
checking for main in -lpth... no
checking for main in -limmclient... no
checking for main in -limm_server... no
checking gpm.h usability... no
checking gpm.h presence... no
checking for gpm.h... no
checking for main in -lgpm... no
checking ggi/ggi.h usability... no
checking ggi/ggi.h presence... no
checking for ggi/ggi.h... no
checking for main in -lggi... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating doc/zhcon.1
config.status: creating debian/Makefile
config.status: creating tools/Makefile
config.status: creating font/Makefile
config.status: creating input/Makefile
config.status: creating src/Makefile
config.status: creating src/display/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands

Configuration:
Target system:          i686-pc-linux-gnu
Source code location:    .
C++ Compiler:             g++
C++ Compiler flags:       -funsigned-char -O2 -march=i686 -DNDEBUG -Wall
C Compiler:             gcc
C Compiler flags:       -funsigned-char -O2 -march=i686 -DNDEBUG -Wall
VGA support:             yes
gpm moues support:       no
libggi support:          no
unicon support:          no
zhcon binary dir:       /usr/local/bin
zhcon files dir:          /usr/local/lib/zhcon

Config complete, now type make to build zhcon.
Good Luck!
[root@linuxserver zhcon-0.2.5]# make
make  all-recursive
make[1]: Entering directory `/usr/zhcon-0.2.5'
Making all in src
make[2]: Entering directory `/usr/zhcon-0.2.5/src'
Making all in display
make[3]: Entering directory `/usr/zhcon-0.2.5/src/display'
if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src -funsigned-char -O2 -march=i686 -DNDEBUG -Wall -MT fbdev.o -MD -MP -MF ".deps/fbdev.Tpo" -c -o fbdev.o fbdev.cpp; \
then mv -f ".deps/fbdev.Tpo" ".deps/fbdev.Po"; else rm -f ".deps/fbdev.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src -funsigned-char -O2 -march=i686 -DNDEBUG -Wall -MT fblinear15.o -MD -MP -MF ".deps/fblinear15.Tpo" -c -o fblinear15.o fblinear15.cpp; \
then mv -f ".deps/fblinear15.Tpo" ".deps/fblinear15.Po"; else rm -f ".deps/fblinear15.Tpo"; exit 1; fi
if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src -funsigned-char -O2 -march=i686 -DNDEBUG -Wall -MT fblinear16.o -MD -MP -MF ".deps/fblinear16.Tpo" -c -o fblinear16.o fblinear16.cpp; \
then mv -f ".deps/fblinear16.Tpo" ".deps/fblinear16.Po"; else rm -f ".deps/fblinear16.Tpo"; exit 1; fi
fblinear16.cpp: In member function ‘virtual void FBLinear16::RevRect(int, int, int, int)’:
fblinear16.cpp:89: 警告：‘dest32’上的运算结果可能是未定义的
if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src -funsigned-char -O2 -march=i686 -DNDEBUG -Wall -MT fblinear24.o -MD -MP -MF ".deps/fblinear24.Tpo" -c -o fblinear24.o fblinear24.cpp; \
then mv -f ".deps/fblinear24.Tpo" ".deps/fblinear24.Po"; else rm -f ".deps/fblinear24.Tpo"; exit 1; fi
fblinear24.cpp: In member function ‘virtual void FBLinear24::RevRect(int, int, int, int)’:
fblinear24.cpp:139: 警告：‘dest32’上的运算结果可能是未定义的
fblinear24.cpp:140: 警告：‘dest32’上的运算结果可能是未定义的
fblinear24.cpp:141: 警告：‘dest32’上的运算结果可能是未定义的
fblinear24.cpp:144: 警告：‘dest32’上的运算结果可能是未定义的
fblinear24.cpp:146: 警告：‘dest16’上的运算结果可能是未定义的
fblinear24.cpp:151: 警告：‘dest16’上的运算结果可能是未定义的
if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src -funsigned-char -O2 -march=i686 -DNDEBUG -Wall -MT fblinear32.o -MD -MP -MF ".deps/fblinear32.Tpo" -c -o fblinear32.o fblinear32.cpp; \
then mv -f ".deps/fblinear32.Tpo" ".deps/fblinear32.Po"; else rm -f ".deps/fblinear32.Tpo"; exit 1; fi
fblinear32.cpp: In member function ‘virtual void FBLinear32::RevRect(int, int, int, int)’:
fblinear32.cpp:77: 警告：‘dest32’上的运算结果可能是未定义的
if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src -funsigned-char -O2 -march=i686 -DNDEBUG -Wall -MT fblinear4.o -MD -MP -MF ".deps/fblinear4.Tpo" -c -o fblinear4.o fblinear4.cpp; \
then mv -f ".deps/fblinear4.Tpo" ".deps/fblinear4.Po"; else rm -f ".deps/fblinear4.Tpo"; exit 1; fi
fblinear4.cpp: In member function ‘virtual void FBLinear4::FillRect(int, int, int, int, int)’:
fblinear4.cpp:75: 错误：‘memset’在此作用域中尚未声明
make[3]: *** [fblinear4.o] 错误 1
make[3]: Leaving directory `/usr/zhcon-0.2.5/src/display'
make[2]: *** [all-recursive] 错误 1
make[2]: Leaving directory `/usr/zhcon-0.2.5/src'
make[1]: *** [all-recursive] 错误 1
make[1]: Leaving directory `/usr/zhcon-0.2.5'
make: *** [all] 错误 2
[root@linuxserver zhcon-0.2.5]# make install
Making install in src
make[1]: Entering directory `/usr/zhcon-0.2.5/src'
Making install in display
make[2]: Entering directory `/usr/zhcon-0.2.5/src/display'
if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src -funsigned-char -O2 -march=i686 -DNDEBUG -Wall -MT fblinear4.o -MD -MP -MF ".deps/fblinear4.Tpo" -c -o fblinear4.o fblinear4.cpp; \
then mv -f ".deps/fblinear4.Tpo" ".deps/fblinear4.Po"; else rm -f ".deps/fblinear4.Tpo"; exit 1; fi
fblinear4.cpp: In member function ‘virtual void FBLinear4::FillRect(int, int, int, int, int)’:
fblinear4.cpp:75: 错误：‘memset’在此作用域中尚未声明
make[2]: *** [fblinear4.o] 错误 1
make[2]: Leaving directory `/usr/zhcon-0.2.5/src/display'
make[1]: *** [install-recursive] 错误 1
make[1]: Leaving directory `/usr/zhcon-0.2.5/src'
make: *** [install-recursive] 错误 1
[root@linuxserver zhcon-0.2.5]#

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)