Chinaunix

标题: 大家帮帮忙,谁能告诉我RJ11转DB9的线序是什么。 [打印本页]

作者: solaris_unix    时间: 2004-07-15 15:07
标题: 大家帮帮忙,谁能告诉我RJ11转DB9的线序是什么。
如提!谢谢!!
作者: solaris_unix    时间: 2004-07-15 17:08
标题: 大家帮帮忙,谁能告诉我RJ11转DB9的线序是什么。
没有人知道吗?
作者: q1208c    时间: 2004-07-15 17:15
标题: 大家帮帮忙,谁能告诉我RJ11转DB9的线序是什么。
RJ11只有两条线, 不知道楼主要用来做什么用呢?
作者: chenpp    时间: 2004-07-15 17:19
标题: 大家帮帮忙,谁能告诉我RJ11转DB9的线序是什么。
rj11 4跳,之不过用做电话时是2跳。别误会,

线续忘了,
要是配t3最好配ip吧,t3+是rj45
作者: Philmoon    时间: 2004-07-15 17:32
标题: 大家帮帮忙,谁能告诉我RJ11转DB9的线序是什么。
这个好象没标准吧。如何转是看你两端都要接些什么。
作者: yipianyipian    时间: 2009-10-10 08:47
哎,一边边DB9 串口线,一边是四针的RJ11 恼火的很!!
作者: yuio654    时间: 2009-10-10 09:07
(This information is reprinted from the xxx Disk Tray Installation, Operation, and Service Manual.) Pin  Function
---  --------
1    Ground
2-3  Reserved
4    Ground
5    RXD
6    TXD


###########################
DB9 SERIAL (10101) port

Pin Signal                 Pin Signal
--- ------                 --- ------
1   Data Carrier Detect    6   Data Set Ready
2   Receive Data           7   Request to Send
3   Transmit Data          8   Clear to Send
4   Data Terminal Ready    9   Ring Indicator
5   Ground

Now I'm not so sure about the electrical pinout standard is followed by this router? Good luck!




还不行,看这里

http://www.aixchina.net/?14372/viewspace-18721.html
作者: easybegin    时间: 2009-10-10 09:10
这么老的贴
作者: yuio654    时间: 2009-10-10 09:13
没看到4楼竟然是04年的
作者: free4us    时间: 2009-11-05 10:42
同问,有详细的对应关系没,麻烦列一下
作者: 651161538    时间: 2011-04-28 11:55
本帖最后由 651161538 于 2015-12-27 18:39 编辑

..............................




欢迎光临 Chinaunix (http://bbs.chinaunix.net/) Powered by Discuz! X3.2