Chinaunix

标题: vsftpd不能设置listen_address [打印本页]

作者: sndbox 时间: 2012-05-31 17:08
标题: vsftpd不能设置listen_address
一旦在/etc/vsftpd/vsftpd.conf里设置了listen_address=192.168.1.100，就无法启动，报错：500 OOPS: could not bind listening IPv4 socket
去掉之后正常，为什么呢？检查过，没有设置xinetd模式
如果我要监听一个网段或者多个IP怎么办？比如监听192.168.1.0/24和192.168.2.0/24 ？？
内容如下：

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
chroot_local_user=YES
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only

# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown

# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties

# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list

# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES

pam_service_name=vsftpd
userlist_enable=YES
#enable for standalone mode
listen=YES
tcp_wrappers=YES

anon_root=/ftpdata
#listen_address=192.168.1.100

作者: sndbox 时间: 2012-05-31 17:10
# vsftpd -v
vsftpd: version 2.0.1

作者: ulovko 时间: 2012-05-31 17:24
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES # 是否使用 xinetd管理，YES 则是standalone mode
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd whith two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES

没发现有listen_address 着个选项？

作者: 346279055 时间: 2012-05-31 17:36
window2003装个flashFXP软件做个ftp server比这个玩意强多了。

作者: sndbox 时间: 2012-05-31 17:42

ulovko 发表于 2012-05-31 17:24
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets ...

是我自己添上的，不至于这个版本不支持listen_address选项吧！

作者: ulovko 时间: 2012-05-31 17:46
回复 5# sndbox

我这是最新版本的都没发现有着个选项。

作者: fwhkggyn 时间: 2012-05-31 17:48
man vsftpd.conf

作者: sndbox 时间: 2012-05-31 17:52

ulovko 发表于 2012-05-31 17:46
回复 5# sndbox

啊！难道这个是骗人的：http://www.xxlinux.com/linux/art ... 20090119/14958.html

那该怎么设定监听范围啊？

作者: ulovko 时间: 2012-05-31 18:00
回复 8# sndbox

比如监听192.168.1.0/24和192.168.2.0/24 ？？

大哥这是设置服务所在IP的，不是用来监听客户端的！！
您现在FTP 跑在什么IP上就写什么IP

作者: chenyx 时间: 2012-05-31 18:22

   listen_address
            If  vsftpd is in standalone mode, the default listen address (of
            all local interfaces) may be overridden by this setting. Provide
            a numeric IP address.

            Default: (none)

有这个选项

作者: chenyx 时间: 2012-05-31 18:23
listen_address后面要写服务器的ip

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)