Chinaunix

标题: M4000更换电源记录 [打印本页]

作者: znnnz 时间: 2012-09-24 10:13
标题: M4000更换电源记录
XSCF> replacefru
----------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a type of FRU to be replaced.

1. FAN       (Fan Unit)
2. PSU       (Power Supply Unit)
----------------------------------------------------------------------
Select [1,2|c:cancel] :2

----------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a PSU to be replaced.

No. FRU          Status
--- --------------- ------------------
1. PSU#0          Normal
2. PSU#1          Normal
----------------------------------------------------------------------
Select [1,2|b:back] :1

You are about to replace PSU#0.
Do you want to continue?[r:replace|c:cancel] :r

Please confirm the Ready LED is not lit and that the Check LED is
blinking.
If this is the case, please replace PSU#0.
After replacement has been completed, please select[f:finish] :f

Diagnostic tests for PSU#0 have started.
[This operation may take up to 3 minute(s)]
(progress scale reported in seconds)
0.....  30..done

----------------------------------------------------------------------
Maintenance/Replacement Menu
Status of the replaced FRU.

FRU          Status
------------- --------
PSU#0       Normal
----------------------------------------------------------------------
The replacement of PSU#0 has completed normally.[f:finish] :f

----------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a type of FRU to be replaced.

1. FAN       (Fan Unit)
2. PSU       (Power Supply Unit)
----------------------------------------------------------------------
Select [1,2|c:cancel] :c

作者: 119beyond 时间: 2012-09-24 17:09
按手册来

作者: wait空白 时间: 2012-09-24 23:00
不错。不过没啥含量。。

作者: 围观团团长 时间: 2012-09-25 01:04
还记得我第一次换M4000电源的时候声音突然变小我以为机器宕了，吓死我了。

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)