Chinaunix

标题: 关于snmp移植的问题 [打印本页]

作者: lianglong209 时间: 2012-10-11 14:41
标题: 关于snmp移植的问题
本帖最后由 lianglong209 于 2012-10-11 16:02 编辑

新手求助，请问怎么将snmp移植到arm板上上运行，到网上找了些资料，但是按照其方法还是不行。
求前辈指点！
先谢过

作者: daniel_kohler 时间: 2012-10-15 09:01
回复 1# lianglong209

遇到的具体问题是什么?

作者: lianglong209 时间: 2012-10-15 09:06
就是现在我需要让snmpd进程在运行时挂载自己的一个动态库，我在snmpd.conf里面用dlmod命令添加了动态库的名字跟路径，可是提示我
snmpd.conf: line 427: Warning: Unknown token: dlmod.
这是怎么解决的啊？谢谢啊
回复 2# daniel_kohler

作者: daniel_kohler 时间: 2012-10-15 09:17
回复 3# lianglong209

看一下你编译后, dlmod.o生成了吗?

作者: lianglong209 时间: 2012-10-15 10:52
我关闭--enable-mini-agent这个选项后，在agent/mibgroup/ucd-snmp里面看到了dlmod.o这个文件，可是现在我运行snmpd出现段错误的报错，这是怎么回事啊？
我把我的./configure参数贴出来，是不是这些参数选错了？
　　--prefix=/usr/local/snmp 安装的目录
　　--build=i686-linux
　　--host=arm-linux
　　--target=arm-linux
　　--enable-debugging 打开调试信息
　　--disable-ipv6
　　--with-endianness=little
　　--disable-manuals
　　--disable-ucd-snmp-compatibility
　　--enable-as-needed
　　--disable-snmptrapd-subagent

以下是我运行./snmpd -f -Le -d -c /mnt/snmpd.conf 之后的信息，关键是最后一个段错误。导致服务不能运行。
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (HOST-RESOURCES-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (NOTIFICATION-LOG-MIB): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (NET-SNMP-AGENT-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (NET-SNMP-EXTEND-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
Segmentation fault
#./snmpd -f -Le -d -c /mnt/snmpd.conf
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (HOST-RESOURCES-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (NOTIFICATION-LOG-MIB): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (NET-SNMP-AGENT-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (NET-SNMP-EXTEND-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
Segmentation fault
回复 4# daniel_kohler

作者: lianglong209 时间: 2012-10-15 11:07
前辈求解答，为什么出现这个段错误回复 4# daniel_kohler

作者: pioneerl 时间: 2013-03-09 15:59

lianglong209 发表于 2012-10-15 09:06
就是现在我需要让snmpd进程在运行时挂载自己的一个动态库，我在snmpd.conf里面用dlmod命令添加了动态库的名 ...

你是怎么解决的啊？我还碰到Warning: Unknown token: pass.。。这又是什么情况？

作者: lianglong209 时间: 2013-03-19 11:48
你也是要挂载自己的库么?回复 7# pioneerl

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)