当输入步骤5后如果出现：
Memory excessively fragmented (inuse map full)
WARNING: can\'t allocate page table for pstart
Loading ram disk image fd(64)rootFS
Memory excessively fragmented (inuse map full)
Cannot load ram disk :Unable to allocate memory
提示并死机时，则重启，然后在Boot:下先输入mem=1m-128m，这里的128m是分配给VMware时的内存数，各位按照自己VMware分配值做相应修改。然后再进行第5步
6.中途会提示你插入软盘
Please insert the fd(65)blc volume and press<Return>;
按回车键即可。
7.出现
Please enter
\'r\' if you wish to try replacement
\'a\' if you want to use character magor 6 [default]
or \'q\' to quit:
时，选择a,等好一会儿,正常安装(网卡自动检测，并配置好ip地址)。
8.出现
Please select the floppy device you are using:
(1) /dev/fd0
(2) /dev/fd1
时，选择2再选择b (Abort BTLD load, but continue installation),
出现安装进度,直至重启。
当输入步骤9后如果出现：
Memory excessively fragmented (inuse map full)
WARNING: can\'t allocate page table for pstart
Loading ram disk image fd(64)rootFS
Memory excessively fragmented (inuse map full)
Cannot load ram disk :Unable to allocate memory
提示并死机时，则重启，然后在Boot:下先输入mem=1m-128m，这里的128m是分配给VMware时的内存数，各位按照自己VMware分配值做相应修改。然后再进行第9步)
10. 重复6,7
11. 提示输入密码时，单用户方式（不要ctrl_d多用户)
12.
mount /dev/fd0135ds18 /mnt
btldinstall /mnt -->; 选blc
-->; Do you want to replace it with the version in blc? y
-->; Do you want to preserve the host adaper configure information? n
-->; 下面一路为y，直至命令运行结束回到提示符。