标题: 如何在solaris上修改显示器的分辨率和刷新率？ [打印本页] 作者: liluo 时间: 2001-11-29 20:21 标题: 如何在solaris上修改显示器的分辨率和刷新率？ 关于backgroud的其他选项都有，这两个选项在那里啊作者: 上帝的左手 时间: 2001-11-29 20:37 标题: 用这个命令 如果你用的是SOLARIS，那么就用m64config 吧
e.g. # m64config -res 1024x768x75作者: solarwind 时间: 2001-12-03 11:21
If you can find /dev/fbs/m640, your are using PGX. If you
> find out /dev/fbs/gfxp0, you are using PGX32. The following is the
> descrition to configure it:
> To use the PGX in 24 bit mode, use the m64config command to
> change to a resolution that supports the desired colordepth, then
> either use the m64config command with the -depth option or modify
> Xservers appropriately. Note that if there is a setting in
> Xservers, it will override the m64config setting.
>
> Example: Setting a PGX to use 24 bit at 1152x900 using m64config:
>
> # m64config -res 1152x900x76 now
> # m64config -depth 24
> # m64config -prconf
>
> PGX 32 Notes: Changing the PGX32 Resolution
>
> Resolutions up to 1280 x 1024 default to 8/24-bit mode.
> Resolutions over 1280 x 1024 default to 8-bit mode.
> By default, the bit depth is set to 8/24 for resolutions of
> 1280x1024 and less or 8 only for higher resolutions.作者: solarwind 时间: 2001-12-03 11:23
PGX32
#GFXconfig -res 1024x768x60
#GFXconfig -depth <8/24>作者: lql0459 时间: 2002-01-01 10:13
要是RedHat Linux 怎么办，不要我用Xconfigurator 吧？作者: ruiliming 时间: 2002-01-04 09:38 标题: 如果是PGX显卡的话，可以用/usr/sbin/pgxconfig 用pgxconfig -i可以进入图形方式进行配置，很简单的作者: oramind 时间: 2002-01-05 05:04
really depends on hardware, video cards.