Chinaunix

标题: 如何改scsi-initiator-id的问题，请大侠解释 [打印本页]

作者: shyzqing 时间: 2005-05-14 22:03
标题: 如何改scsi-initiator-id的问题，请大侠解释
如何改scsi-initiator-id的问题，我问了sun的工程师\r\n目前主要的观点有两种\r\n1。\r\na. ok show-disks 记下控制器的路径 \r\nb. 创建一个nvramrc脚本设置scsi-initiator-id \r\nok nvedit \r\n0: probe-all install-console banner \r\n1: cd /pci@6,4000/scsi@3 \r\n2: 6 \" scsi-initiator-id\" integer-property \r\n3: device-end \r\n4: cd /pci@6,4000/scsi@2,1 \r\n5: 6 \" scsi-initiator-id\" integer-property \r\n6: device-end \r\n7: banner (Control C) \r\nok nvstore \r\nok setenv use-nvramrc? True \r\nok setenv auto-boot? true \r\nok reset-all \r\nok boot \r\n\r\n\r\n\r\n2。\r\na. ok proble－scsi－all 记下记下SCSI光驱的和磁带机的地址， \r\nb。ok setenv scsi-initiator-id 6\r\n3. 创建一个nvramrc脚本设置scsi-initiator-id \r\nok nvedit \r\n0: probe-all install-console banner \r\n1: cd /pci@6,4000/scsi@3 \r\n2: 7 \" scsi-initiator-id\" integer-property \r\n3: device-end \r\n4: cd /pci@6,4000/scsi@2,1 \r\n5: 7 \" scsi-initiator-id\" integer-property \r\n6: device-end \r\n7: banner (Control C) \r\nok nvstore \r\nok setenv use-nvramrc? True \r\nok setenv auto-boot? true \r\nok reset-all \r\nok boot

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)