Chinaunix

标题: 问题在线等待!!关于系统的挂接 [打印本页]

作者: keer5000 时间: 2003-03-25 20:26
标题: 问题在线等待!!关于系统的挂接
#mount -a
mount: /dev/vg00/webapp is already mounted on /webapp
mount - Cannot open /dev/vgbill1/billa: No such device or address

mount: /dev/vg00/oraclelv is already mounted on /oracle
mount: /dev/vg00/lvol8 is already mounted on /var
mount: /dev/vg00/lvol7 is already mounted on /usr
mount: /dev/vg00/lvnie is already mounted on /usr/nie
mount: /dev/vg00/lvol6 is already mounted on /opt
mount: /dev/vg00/lvol5 is already mounted on /home
mount: /dev/vg00/lvol4 is already mounted on /tmp
mount: /dev/vg00/lvol1 is already mounted on /stand
#

我想知道我的哪个 /dev/vgbill1/billa:是否有问题了那.

谢谢.

作者: Shad 时间: 2003-03-25 23:32
标题: 问题在线等待!!关于系统的挂接

原帖由 "keer5000" 发表：
#mount -a
mount: /dev/vg00/webapp is already mounted on /webapp
mount - Cannot open /dev/vgbill1/billa: No such device or address

mount: /dev/vg00/oraclelv is already mounted on /oracle
mount: /dev/vg00/lvol8 is already mounted on /var
mount: /dev/vg00/lvol7 is already mounted on /usr
mount: /dev/vg00/lvnie is already mounted on /usr/nie
mount: /dev/vg00/lvol6 is already mounted on /opt
mount: /dev/vg00/lvol5 is already mounted on /home
mount: /dev/vg00/lvol4 is already mounted on /tmp
mount: /dev/vg00/lvol1 is already mounted on /stand
#

我想知道我的哪个 /dev/vgbill1/billa:是否有问题了那.

谢谢.

Hi,

1. Check if your "vgbill1" is active or not:
# vgdisplay vgbill1

If it's not active, then do:
# vgchange -a y vgbill1

2. Check your lv names under the /dev/vgbill1, to see there is a lv called "billa":
# ll /dev/vgbill1

You should see both raw and block devices files:
/dev/vgbill1/billa
/dev/vgbill1/rbilla

If you don't see the above 2 lines, then your LV is not there. You should either create a LV or make sure you are using the correct lv name (/dev/vgbill1/billa) in your /etc/fstab file.

Hope this helps.

作者: kevin7954 时间: 2003-03-26 00:20
标题: 问题在线等待!!关于系统的挂接
check /etc/fstab by "cat /etc/fstab"

chekc current mount point by "mount -v"

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)