Chinaunix

标题: E4500可以热插拔吗 [打印本页]

作者: jf408 时间: 2006-01-17 11:01
标题: E4500可以热插拔吗
我们这有一台E4500，现在要插入一块CPU/MEM板，看文档上说可以不关系统直接插(业务系统不能停)，想问一下有没有谁试过呀，担心这样做会有问题

还有如果板卡的固件跟机器的不一致会不会有什么问题呀

作者: Philmoon 时间: 2006-01-17 11:20
If the dynamic reconfiguration feature is enabled in the operating environment, \r\nservice providers can install, remove, or replace a hot-pluggable system board\r\nwithout powering down the system. For the Solaris 2.6, Solaris 7, and Solaris 8\r\nOperating Environments, dynamic reconfiguration applies to specific types of\r\nboards in the Sun Enterprise 3x00.\r\nFor instructions, refer to the Sun Enterprise\r\n6x00,5x00,4x00, and 3x00 Systems Dynamic Reconfiguration User’s Guide included in the\r\nonline AnswerBook2 for your Solaris operating environment

作者: faintblue 时间: 2006-01-17 11:39
Think it again before adding another CPU board online for Exx00.\r\nDon\'t surprise if the system crashes down during operations.

作者: jf408 时间: 2006-01-17 13:49

原帖由 faintblue 于 2006-1-17 11:39 发表\r\nThink it again before adding another CPU board online for Exx00.\r\nDon\'t surprise if the system crashes down during operations.

\r\n\r\n\r\n不是吧，万一系统CRASH掉了怎么办，那我还敢加呀

作者: 风之幻想 时间: 2006-01-17 14:00
建议还是停掉以后加吧.

作者: jf408 时间: 2006-01-17 14:54

原帖由 风之幻想 于 2006-1-17 14:00 发表\r\n建议还是停掉以后加吧.

\r\n\r\n\r\n唉，看来只能这样了，安全第一

作者: 风之幻想 时间: 2006-01-17 14:56

原帖由 jf408 于 2006-1-17 14:54 发表\r\n\r\n\r\n\r\n唉，看来只能这样了，安全第一

\r\n我一般在增加板子的时候都是停了加的.安全最重要呀.

作者: faintblue 时间: 2006-01-17 22:23

原帖由 jf408 于 2006-1-17 13:49 发表\r\n\r\n不是吧，万一系统CRASH掉了怎么办，那我还敢加呀

\r\n\r\n\r\nIn the very eariler Exx00, only hardware DR supported. Afterwards, things improved.\r\nBut DR in Exx00 never work perfectly. It depends on Board P/N, firmware version, Solaris versio .... \r\n\r\nYou can test it in development but production environment.\r\n\r\nBased on best practice, the only trusted DR is in servers which support domains such as E10k, F15/20/25k.

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)