Chinaunix

标题: 我的Solaris10x86就这么夭折了[已解决] [打印本页]

作者: JJCH    时间: 2006-05-13 22:34
标题: 我的Solaris10x86就这么夭折了[已解决]
安装后发现没有找到网卡,于是就根据精华区里的方法配制,\r\nprtconf -pv | grep Ethernet,找到一个,但是没有pcixxxx等,于是就\r\nprtconf -pv > tmp.txt  再找到Ethernet,在其上面有类似于pcixxxx.xxxx的东西,\r\n再把它加到/etc/driver_aliases里面和/boot/solaris/devicedb/master\r\n执行devlinks\r\ntouch /reconfigure\r\nreboot\r\n结果就出不来了,在grub里面选择solaris,一直在重启又回到grub菜单。\r\n\r\n晕了,请教各位有什么办法能修复吗?\r\n注:nvidia nForce网卡,Solaris10x86(1/06)\n\n[ 本帖最后由 JJCH 于 2006-5-16 13:41 编辑 ]
作者: cuci    时间: 2006-05-13 22:51
单用户还能进不?\r\n或者把引导盘挂从盘把文件还原试试
作者: JJCH    时间: 2006-05-13 22:55
单用户还能进。\r\n可是当我修改文件的时候,系统提示是只读的,修改了没法保存。
作者: cuci    时间: 2006-05-14 14:28
网卡的问题你search下坛子里吧,有很多人发过相关的帖
作者: JJCH    时间: 2006-05-15 13:15
论坛里那些文章中没有一篇是针对nForce网卡来说明的,那些方法差不多也都试过了,\r\n另外在Solaris官方硬件支持列表里面也没有对nForce的支持,后来又找到这个地址:\r\nhttp://homepage2.nifty.com/mrym3/taiyodo/eng/ \r\n里有一些免费的For Solaris驱动,\r\n下载相应的驱动,然后按照里面的说明做了一遍,有一次貌似启用了网卡, ifconfig -a的时候看到了nfo0的信息,\r\n但后来怎么也弄不到那个样子了。\r\n\r\n这个是prtconf -pv结果中关于Ethernet 的部分:\r\n
  1. \r\n        Node 0x00000b\r\n            assigned-addresses:  82002010.00000000.e9001000.00000000.00001000.81002014.00000000.\r\n0000d000.00000000.00000008\r\n            reg:  00002000.00000000.00000000.00000000.00000000.02002010.00000000.00000000.\r\n00000000.00001000.01002014.00000000.00000000.00000000.00000008\r\n            compatible: \'pci10de,66.1695.1000.a1\' + \'pci10de,66.1695.1000\' + \'pci1695,1000\' + \'pci10de,66.a1\' + \'pci10de,66\' + \'pciclass,020000\' + \'pciclass,0200\'\r\n            model:  \'Ethernet controller\'\r\n            power-consumption:  00000001.00000001\r\n            66mhz-capable:  \r\n            fast-back-to-back:  \r\n            devsel-speed:  00000000\r\n            interrupts:  00000001\r\n            max-latency:  00000014\r\n            min-grant:  00000001\r\n            subsystem-vendor-id:  00001695\r\n            subsystem-id:  00001000\r\n            unit-address:  \'4\'\r\n            class-code:  00020000\r\n            revision-id:  000000a1\r\n            vendor-id:  000010de\r\n            device-id:  00000066\r\n            name:  \'pci1695,1000\'\r\n
复制代码
\r\n\r\n这里是关于网卡的一些纪录信息\r\n
  1. \r\nMay 14 18:04:51 Solaris10x86 nfo: [ID 130221 kern.info] nfo0: nForce mac type 2 (vid: 0x10de, did: 0x0066, revid: 0xa1)\r\nMay 14 18:04:51 Solaris10x86 nfo: [ID 217474 kern.info] nfo0: ilr 0x1401010b\r\nMay 14 18:04:51 Solaris10x86 nfo: [ID 451511 kern.info] nfo0: MII PHY (0x00008201) found at 1\r\nMay 14 18:04:51 Solaris10x86 nfo: [ID 426109 kern.info] nfo0: PHY control:3100<100MB,ANE,FDUPLEX>, status:786d<100_BASEX_FD,100_BASEX,10_BASE_FD,10_BASE,MFPRMBLSUPR,ANDONE,CANAUTONEG,LINKUP,EXTENDED>, advert:1e1<100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>, lpar:45e1<PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>\r\nMay 14 18:04:51 Solaris10x86 nfo: [ID 119377 kern.info] nfo0: xstatus:0\r\nMay 14 18:04:51 Solaris10x86 genunix: [ID 678236 kern.info] Ethernet address = 0:4:61:6a:7b:8b\r\nMay 14 18:04:51 Solaris10x86 gld: [ID 944156 kern.info] nfo0: nfo: type \"ether\" mac address 00:04:61:6a:7b:8b\r\nMay 14 18:04:51 Solaris10x86 pci: [ID 370704 kern.info] PCI-device: pci1695,1000@4, nfo0\r\nMay 14 18:04:51 Solaris10x86 genunix: [ID 936769 kern.info] nfo0 is /pci@0,0/pci1695,1000@4\r\nMay 14 18:04:51 Solaris10x86 unix: [ID 954099 kern.info] NOTICE: IRQ20 is being shared by drivers with different interrupt levels.\r\nMay 14 18:04:51 Solaris10x86 This may result in reduced system performance.\r\nMay 14 18:04:53 Solaris10x86 nfo: [ID 831844 kern.info] nfo0: auto-negotiation started\r\nMay 14 18:04:55 Solaris10x86 last message repeated 1 time\r\nMay 14 18:04:55 Solaris10x86 ip: [ID 482227 kern.notice] ip_arp_done: init failed\r\nMay 14 18:04:56 Solaris10x86 genunix: [ID 773945 kern.info]         UltraDMA mode 6 selected\r\nMay 14 18:04:56 Solaris10x86 genunix: [ID 454863 kern.info] dump on /dev/dsk/c1d0s1 size 513 MB\r\nMay 14 18:04:56 Solaris10x86 svc.startd[7]: [ID 652011 daemon.warning] svc:/network/physical:default: Method \"/lib/svc/method/net-physical\" failed with exit status 96.\r\nMay 14 18:04:57 Solaris10x86 nfo: [ID 985465 kern.info] nfo0: auto-negotiation done, advert:5e1<PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>, lpable:45e1<PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>\r\nMay 14 18:04:57 Solaris10x86 nfo: [ID 103695 kern.info] nfo0: Link up: 100 Mbps full duplex with symmetric flow control\r\n
复制代码
\r\n\r\n另外开机的时候还出现一些关于网络配置的错误信息\r\n
  1. \r\nMay 15 12:38:58 Solaris10x86 sendmail[273]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name\r\n
复制代码

作者: Solaris12    时间: 2006-05-15 16:43
原帖由 JJCH 于 2006-5-13 22:34 发表\r\n安装后发现没有找到网卡,于是就根据精华区里的方法配制,\r\nprtconf -pv | grep Ethernet,找到一个,但是没有pcixxxx等,于是就\r\nprtconf -pv > tmp.txt  再找到Ethernet,在其上面有类似于pcixxxx.xxxx的东西 ...
\r\n\r\n\r\n是nvidia的集成网卡吗?\r\n\r\n在solaris 10 u1中只支持1000M 的nvidia网卡,驱动叫nge。
作者: JJCH    时间: 2006-05-15 18:29
谢谢大家的关注,现在已经可以正常上网了,至于具体的配置方法我现在也是迷迷糊糊的,\r\n也不记得自己进行了哪些操作,不过有一点确定的是使用的http://homepage2.nifty.com/mrym3/taiyodo/eng/ 上面的nfo驱动程序。
作者: stevens_wu    时间: 2006-05-15 20:32
楼上的,以前是用ubuntu吗?
作者: garylyell    时间: 2007-04-07 23:20
标题: Ethernet
为什么我在prtconf -pv > tmp.txt 时,找不到\"Ethernet\"呢?\r\n我的是同方笔记本,集成nvidia网卡和显卡\r\n已经一个月了都没装上网卡驱动,头痛阿。要再装不上我就把本本砸了!\n\n[ 本帖最后由 garylyell 于 2007-4-7 23:25 编辑 ]




欢迎光临 Chinaunix (http://bbs.chinaunix.net/) Powered by Discuz! X3.2