Chinaunix

标题: 网卡安装不成功 [打印本页]

作者: hplxxm 时间: 2008-08-18 21:48
标题: 网卡安装不成功
bash-3.2# cd /data/vel-0.8.5\r\nbash-3.2# ls\r\nadddrv.sh Makefile.common mii.h\r\namd64 Makefile.config obj\r\nCOPYING Makefile.i386_gcc README.japanese-euc\r\ngem.c Makefile.i386_suncc README.txt\r\ngem.h Makefile.macros sparc\r\ni386 Makefile.sparc_gcc sparcv9\r\nMakefile Makefile.sparc_suncc vel_gem.c\r\nMakefile.amd64_gcc Makefile.sparcv9_gcc vt612xreg.h\r\nMakefile.amd64_suncc Makefile.sparcv9_suncc\r\nbash-3.2# make install\r\n/usr/sbin/install -f /kernel/drv -m 755 -u root -g sys i386/vel\r\nnew owner is root\r\ni386/vel installed as /kernel/drv/vel\r\nbash-3.2# ./adddrv.sh \r\n(\"pci1106,3119\") already in use as a driver or alias.\r\nbash-3.2# cd obj\r\nbash-3.2# ls\r\ngem.o vel vel_gem.o\r\nbash-3.2# modload vel\r\ncan\'t load module: Invalid argument\r\nbash-3.2# devfsadm -i vel\r\ndevfsadm: driver failed to attach: vel\r\nbash-3.2# ifconfig vel0\r\nifconfig: status: SIOCGLIFFLAGS: vel0: no such interface\r\n系统自带的驱动检测程序提示网卡驱动：vel(driver misconfigured)\r\n高手们，下一步应该怎么作

作者: KirovAirShip 时间: 2008-08-18 22:32
标题: 回复 #1 hplxxm 的帖子
你没有plumb啊：ifconfig plumb vel0\r\n但是在此之前好像还有些没做好\r\n你再google一下，我刚用Solaris时网卡也是问题，但莫名其妙就配置好了

作者: hplxxm 时间: 2008-08-25 17:25
还是没弄好,找了一块8139的卡,现在算是能上网了!!希望下一版能自动识别!!!

作者: albcamus 时间: 2008-08-26 15:43
post your \r\n\r\n# dladm show-dev\r\n\r\nplease

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)