Chinaunix

标题: solairs10 rsh 问题 rcmd: socket: Cannot assign requested address [打印本页]

作者: gyh9711 时间: 2009-12-02 15:40
标题: solairs10 rsh 问题 rcmd: socket: Cannot assign requested address
操作系统版本：\r\nSunOS dszmas1o 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire\r\n\r\n今天应用r命令如 rsh ,rcp 经常会出现\r\nrcmd: socket: Cannot assign requested address\r\n错误提示\r\n不知道有何办法解决？\r\n谢谢

作者: paul_ham 时间: 2009-12-03 09:43
可以参考下文:\r\n\r\nrsh/rcp maybe using \"reserved\" ports (ie < 1024), of\r\nwhich there are only ~400 available inherently and blocking new\r\nrsh/rcp sessions from being established or due to many connections\r\nin TIME_WAIT status (i.e. wait after close for remote shutdown\r\nretransmission.\r\n\r\nSuggest to increase the existing file descriptors to 8192 and decrease\r\nthe tcp_time_wait_interval from the default of 4 minutes to 1 minute\r\nfor sockets.\r\n\r\nExample:\r\n\r\n# ndd -set /dev/tcp tcp_time_wait_interval 60000

作者: gyh9711 时间: 2009-12-04 11:20
标题: 回复 #2 paul_ham 的帖子
谢了。\r\n最后没有找到好办法，因影响到另外一套系统的正常运行（通过rcp取数据），最后通过重启系统解决问题。\r\n问题时执行# netstat -an |grep \"TIME_WAIT\" | wc -l 的结果\r\n 3554\r\n \r\n现在系统正常情况下\r\n# netstat -an |grep \"TIME_WAIT\" | wc -l\r\n 2770

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)