如下记录:使用zpool clear rpool 和 tank后,依然显示错误存在。请教一下如何修复并让zpool不再显示错误?
# zpool status -v
pool: rpool
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scan: none requested
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
c0d0s0 ONLINE 0 0 0
errors: Permanent errors have been detected in the following files:
pool: tank
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scan: none requested
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
c0d1 ONLINE 0 0 0
errors: Permanent errors have been detected in the following files:
作者: j_l 时间: 2012-11-29 11:13
将tank中的那几个报错文件删掉后,报如下错误:我都已经不要那些文件了,咋zpool还这么钻牛角尖呢?
# zpool status -v tank
pool: tank
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scan: none requested
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
c0d1 ONLINE 0 0 0
errors: Permanent errors have been detected in the following files: