Chinaunix

标题: freebsd9 开机出现引导菜单以后长时间暂停，如何解决 [打印本页]
作者: nbzhy    时间: 2013-04-19 10:40
标题: freebsd9 开机出现引导菜单以后长时间暂停，如何解决
freebsd9 开机出现引导菜单以后长时间暂停，时间能达到3-5分钟，过了这个时间以后，系统能正常引导。里面的服务也正常能用，但是，只要机器重启就要停很久，怎么解决？
停止画面的图片如下：
作者: fender0107401    时间: 2013-04-19 11:06
这个问题比较麻烦，你先贴一下dmesg出来看看。
作者: fender0107401    时间: 2013-04-19 11:09
关键的问题是开发者很难重新这个问题。
作者: nbzhy    时间: 2013-04-19 11:23
本帖最后由 fender0107401 于 2013-04-19 15:13 编辑
  1. dmesg

  3. Copyright (c) 1992-2012 The FreeBSD Project.
  4. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  5.         The Regents of the University of California. All rights reserved.
  6. FreeBSD is a registered trademark of The FreeBSD Foundation.
  7. FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:46:30 UTC 2012
  8.     [email]root@farrell.cse.buffalo.edu[/email]:/usr/obj/usr/src/sys/GENERIC amd64
  9. CPU: Intel(R) Xeon(R) CPU           E5645  @ 2.40GHz (2394.00-MHz K8-class CPU)
  10.   Origin = "GenuineIntel"  Id = 0x206c2  Family = 6  Model = 2c  Stepping = 2
  11.   Features=0x1fe3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
  12.   Features2=0x82982203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,HV>
  13.   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  14.   AMD Features2=0x1<LAHF>
  15.   TSC: P-state invariant
  16. real memory  = 19327352832 (18432 MB)
  17. avail memory = 18590597120 (17729 MB)
  18. Event timer "LAPIC" quality 600
  19. ACPI APIC Table: <PTLTD          APIC  >
  20. FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
  21. FreeBSD/SMP: 1 package(s) x 4 core(s)
  22. cpu0 (BSP): APIC ID:  0
  23. cpu1 (AP): APIC ID:  1
  24. cpu2 (AP): APIC ID:  2
  25. cpu3 (AP): APIC ID:  3
  26. cpu4 (AP): APIC ID:  4
  27. cpu5 (AP): APIC ID:  5
  28. WARNING: Non-uniform processors.
  29. WARNING: Using suboptimal topology.
  30. MADT: Forcing active-low polarity and level trigger for SCI
  31. ioapic0 <Version 1.1> irqs 0-23 on motherboard
  32. kbd1 at kbdmux0
  33. acpi0: <INTEL 440BX> on motherboard
  34. acpi0: Power Button (fixed)
  35. Timecounter "HPET" frequency 14318180 Hz quality 950
  36. Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
  37. acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
  38. cpu0: <ACPI CPU> on acpi0
  39. cpu1: <ACPI CPU> on acpi0
  40. cpu2: <ACPI CPU> on acpi0
  41. cpu3: <ACPI CPU> on acpi0
  42. cpu4: <ACPI CPU> on acpi0
  43. cpu5: <ACPI CPU> on acpi0
  44. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  45. pci0: <ACPI PCI bus> on pcib0
  46. pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
  47. pci1: <ACPI PCI bus> on pcib1
  48. isab0: <PCI-ISA bridge> at device 7.0 on pci0
  49. isa0: <ISA bus> on isab0
  50. atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10c0-0x10cf at device 7.1 on pci0
  51. ata0: <ATA channel 0> on atapci0
  52. ata1: <ATA channel 1> on atapci0
  53. pci0: <bridge> at device 7.3 (no driver attached)
  54. pci0: <base peripheral> at device 7.7 (no driver attached)
  55. vgapci0: <VGA-compatible display> port 0x10d0-0x10df mem 0xd8000000-0xdbffffff,0xd0800000-0xd0ffffff irq 16 at device 15.0 on pci0
  56. mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem 0xd0040000-0xd005ffff,0xd0020000-0xd003ffff irq 17 at device 16.0 on pci0
  57. mpt0: MPI Version=1.2.0.0
  58. pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0
  59. pci2: <ACPI PCI bus> on pcib2
  60. em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x2000-0x203f mem 0xd1020000-0xd103ffff,0xd1000000-0xd100ffff irq 18 at device 0.0 on pci2
  61. em0: Memory Access and/or Bus Master bits were not set!
  62. em0: Ethernet address: 00:50:56:89:7f:8f
  63. pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
  64. pci3: <ACPI PCI bus> on pcib3
  65. pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
  66. pci4: <ACPI PCI bus> on pcib4
  67. pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
  68. pci5: <ACPI PCI bus> on pcib5
  69. pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0
  70. pci6: <ACPI PCI bus> on pcib6
  71. pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0
  72. pci7: <ACPI PCI bus> on pcib7
  73. pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0
  74. pci8: <ACPI PCI bus> on pcib8
  75. pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0
  76. pci9: <ACPI PCI bus> on pcib9
  77. pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0
  78. pci10: <ACPI PCI bus> on pcib10
  79. pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0
  80. pci11: <ACPI PCI bus> on pcib11
  81. pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0
  82. pci12: <ACPI PCI bus> on pcib12
  83. pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0
  84. pci13: <ACPI PCI bus> on pcib13
  85. pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0
  86. pci14: <ACPI PCI bus> on pcib14
  87. pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0
  88. pci15: <ACPI PCI bus> on pcib15
  89. pcib16: <ACPI PCI-PCI bridge> at device 22.5 on pci0
  90. pci16: <ACPI PCI bus> on pcib16
  91. pcib17: <ACPI PCI-PCI bridge> at device 22.6 on pci0
  92. pci17: <ACPI PCI bus> on pcib17
  93. pcib18: <ACPI PCI-PCI bridge> at device 22.7 on pci0
  94. pci18: <ACPI PCI bus> on pcib18
  95. pcib19: <ACPI PCI-PCI bridge> at device 23.0 on pci0
  96. pci19: <ACPI PCI bus> on pcib19
  97. pcib20: <ACPI PCI-PCI bridge> at device 23.1 on pci0
  98. pci20: <ACPI PCI bus> on pcib20
  99. pcib21: <ACPI PCI-PCI bridge> at device 23.2 on pci0
  100. pci21: <ACPI PCI bus> on pcib21
  101. pcib22: <ACPI PCI-PCI bridge> at device 23.3 on pci0
  102. pci22: <ACPI PCI bus> on pcib22
  103. pcib23: <ACPI PCI-PCI bridge> at device 23.4 on pci0
  104. pci23: <ACPI PCI bus> on pcib23
  105. pcib24: <ACPI PCI-PCI bridge> at device 23.5 on pci0
  106. pci24: <ACPI PCI bus> on pcib24
  107. pcib25: <ACPI PCI-PCI bridge> at device 23.6 on pci0
  108. pci25: <ACPI PCI bus> on pcib25
  109. pcib26: <ACPI PCI-PCI bridge> at device 23.7 on pci0
  110. pci26: <ACPI PCI bus> on pcib26
  111. pcib27: <ACPI PCI-PCI bridge> at device 24.0 on pci0
  112. pci27: <ACPI PCI bus> on pcib27
  113. pcib28: <ACPI PCI-PCI bridge> at device 24.1 on pci0
  114. pci28: <ACPI PCI bus> on pcib28
  115. pcib29: <ACPI PCI-PCI bridge> at device 24.2 on pci0
  116. pcib29: failed to allocate initial I/O port window: 0xf000-0xffff
  117. pci29: <ACPI PCI bus> on pcib29
  118. pcib30: <ACPI PCI-PCI bridge> at device 24.3 on pci0
  119. pci30: <ACPI PCI bus> on pcib30
  120. pcib31: <ACPI PCI-PCI bridge> at device 24.4 on pci0
  121. pci31: <ACPI PCI bus> on pcib31
  122. pcib32: <ACPI PCI-PCI bridge> at device 24.5 on pci0
  123. pci32: <ACPI PCI bus> on pcib32
  124. pcib33: <ACPI PCI-PCI bridge> at device 24.6 on pci0
  125. pci33: <ACPI PCI bus> on pcib33
  126. pcib34: <ACPI PCI-PCI bridge> at device 24.7 on pci0
  127. pci34: <ACPI PCI bus> on pcib34
  128. acpi_acad0: <AC Adapter> on acpi0
  129. attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
  130. Timecounter "i8254" frequency 1193182 Hz quality 0
  131. Event timer "i8254" frequency 1193182 Hz quality 100
  132. atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
  133. Event timer "RTC" frequency 32768 Hz quality 0
  134. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
  135. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  136. kbd0 at atkbd0
  137. atkbd0: [GIANT-LOCKED]
  138. psm0: <PS/2 Mouse> irq 12 on atkbdc0
  139. psm0: [GIANT-LOCKED]
  140. psm0: model IntelliMouse, device ID 3
  141. ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
  142. ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
  143. ppbus0: <Parallel port bus> on ppc0
  144. plip0: <PLIP network interface> on ppbus0
  145. lpt0: <Printer> on ppbus0
  146. lpt0: Interrupt-driven port
  147. ppi0: <Parallel I/O> on ppbus0
  148. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  149. uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
  150. fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
  151. fd0: <1440-KB 3.5" drive> on fdc0 drive 0
  152. qpi0: <QPI system bus> on motherboard
  153. sc0: <System console> at flags 0x100 on isa0
  154. sc0: VGA <16 virtual consoles, flags=0x300>
  155. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
  156. acpi_throttle0: <ACPI CPU Throttling> on cpu0
  157. acpi_throttle1: <ACPI CPU Throttling> on cpu1
  158. acpi_throttle1: failed to attach P_CNT
  159. device_attach: acpi_throttle1 attach returned 6
  160. acpi_throttle2: <ACPI CPU Throttling> on cpu2
  161. acpi_throttle2: failed to attach P_CNT
  162. device_attach: acpi_throttle2 attach returned 6
  163. acpi_throttle3: <ACPI CPU Throttling> on cpu3
  164. acpi_throttle3: failed to attach P_CNT
  165. device_attach: acpi_throttle3 attach returned 6
  166. acpi_throttle4: <ACPI CPU Throttling> on cpu4
  167. acpi_throttle4: failed to attach P_CNT
  168. device_attach: acpi_throttle4 attach returned 6
  169. acpi_throttle5: <ACPI CPU Throttling> on cpu5
  170. acpi_throttle5: failed to attach P_CNT
  171. device_attach: acpi_throttle5 attach returned 6
  172. Timecounters tick every 10.000 msec
  173. da0 at mpt0 bus 0 scbus2 target 0 lun 0
  174. da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
  175. da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
  176. da0: Command Queueing enabled
  177. da0: 81920MB (167772160 512 byte sectors: 255H 63S/T 10443C)
  178. cd0 at ata1 bus 0 scbus1 target 0 lun 0
  179. cd0: <NECVMWar VMware IDE CDR10 1.00> Removable CD-ROM SCSI-0 device
  180. cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
  181. cd0: Attempt to query device size failed: NOT READY, Medium not present
  182. SMP: AP CPU #2 Launched!
  183. SMP: AP CPU #1 Launched!
  184. SMP: AP CPU #3 Launched!
  185. SMP: AP CPU #5 Launched!
  186. SMP: AP CPU #4 Launched!
  187. Trying to mount root from ufs:/dev/da0p2 [rw]...
复制代码
作者: 帅却无娇妻    时间: 2013-04-19 11:42
我以前遇到过类似问题，不过我的问题是：在grub4dos下执行chainloader +1后需要很长时间才能看到引导菜单。

我怀疑是BSD分区和其他磁盘分区混淆重叠。我那时的解决办法是先在linux下创建一个BSD slice，安装FreeBSD时只让安装程序执行格式化操作，这样就好了。
作者: nbzhy    时间: 2013-04-19 12:33
我没有和其他分区重叠，是单独的，不过我是把freebsd9安装在esxi5里面的。
作者: nbzhy    时间: 2013-04-22 14:12
哪个老大帮下忙啊。
作者: HonestQiao    时间: 2013-04-25 18:18
出现菜单立马按空格，再选择7，再继续看看有无提示？
作者: ulovko    时间: 2013-04-25 21:09
我只有在虚拟机里面遇到过这个问题  {:3_186:}
作者: gvim    时间: 2013-04-26 02:29
acpi关掉试试
作者: ulovko    时间: 2013-04-26 07:59
gvim 发表于 2013-04-26 02:29
acpi关掉试试


楼主试试 ^_^
作者: nbzhy    时间: 2013-04-27 08:56
请问楼上的，关闭acpi是指关闭cmos里面的吗？
作者: lsstarboy    时间: 2013-04-27 10:20
回复 12# nbzhy


    一楼界面中，按４，或者按一下A。
作者: nbzhy    时间: 2013-04-27 12:46
ACPI 已经 diable 了，仍旧要停止，过一会儿以后继续启动了，哈，基本没效果。我看了，是不是我的服务器内存太大的缘故？因为停止界面以后，原本一出来的是检测内存的界面。我的内存是18g.
作者: lsstarboy    时间: 2013-04-27 17:21
回复 14# nbzhy


    肯定不是内存大的原因，内存质量可以怀疑，大小很普通。
作者: ulovko    时间: 2013-04-27 17:36
@nbzhy 我在虚拟机中是因为内存分配的太少导致的
作者: linpay2000    时间: 2013-05-01 14:10
我的笔记本也有这个问题，一般我不会等，关机重新开机就好了。
正纳闷什么回事呢，不知道是不是ufs与zfs混用的问题。
由于bootzfs在我的机器上不成，boot单独建立了一个ufs分区引导。




欢迎光临 Chinaunix (http://bbs.chinaunix.net/) Powered by Discuz! X3.2