Chinaunix

标题: solaris 10系统挂接EMC存储问题，求解 [打印本页]

作者: Jack_chen881012 时间: 2013-09-11 15:39
标题: solaris 10系统挂接EMC存储问题，求解
本帖最后由 Jack_chen881012 于 2013-09-11 18:00 编辑

各位大侠，今天在挂接EMC存储时出现这样的问题，我format扫盘时
bash-3.00# format
Searching for disks...Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,0 (sd84):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,0 (sd84):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,4 (sd155):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,4 (sd155):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,5 (sd161):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,5 (sd161):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,6 (sd163):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,6 (sd163):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,7 (sd167):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,7 (sd167):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,8 (sd171):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@3,700000/fibre-channel@0,1/sd@10,8 (sd171):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@13,700000/fibre-channel@0,1/sd@11,0 (sd61):
Sep 11 17:19:21 APP1       drive offline
Sep 11 17:19:21 APP1 scsi: WARNING: /pci@13,700000/fibre-channel@0,1/sd@11,0 (sd61):
Sep 11 17:19:21 APP1       drive offline
done

AVAILABLE DISK SELECTIONS:
   0. c0t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
      /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/sd@0,0
   1. c0t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
      /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/sd@1,0
   2. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
      /pci@10,600000/pci@0/pci@8/pci@0/scsi@1/sd@0,0
   3. c1t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
      /pci@10,600000/pci@0/pci@8/pci@0/scsi@1/sd@1,0
   4. c4t16d0 <drive type unknown>
      /pci@3,700000/fibre-channel@0,1/sd@10,0
   5. c4t16d1 <FSCFC66-RAID5-0226 cyl 63739 alt 2 hd 255 sec 189>
      /pci@3,700000/fibre-channel@0,1/sd@10,1
   6. c4t16d2 <FSCFC66-RAID5-0226 cyl 63998 alt 2 hd 256 sec 128>
      /pci@3,700000/fibre-channel@0,1/sd@10,2
   7. c4t16d3 <FSCFC66-RAID5-0226 cyl 63998 alt 2 hd 256 sec 20>
      /pci@3,700000/fibre-channel@0,1/sd@10,3
   8. c4t16d4 <drive type unknown>
      /pci@3,700000/fibre-channel@0,1/sd@10,4
   9. c4t16d5 <drive type unknown>
      /pci@3,700000/fibre-channel@0,1/sd@10,5
   10. c4t16d6 <drive type unknown>
      /pci@3,700000/fibre-channel@0,1/sd@10,6
   11. c4t16d7 <drive type unknown>
      /pci@3,700000/fibre-channel@0,1/sd@10,7
   12. c4t16d8 <drive type unknown>
      /pci@3,700000/fibre-channel@0,1/sd@10,8
   13. c5t17d0 <drive type unknown>
      /pci@13,700000/fibre-channel@0,1/sd@11,0

识别的盘符能正常识别到，但盘的属性全是 drive type unknown状态，不知大侠们可遇到过？最后是怎么解决的？

作者: jiaoruijun 时间: 2013-09-11 23:28
重启下试试，reboot -- -r

作者: Jack_chen881012 时间: 2013-09-11 23:46
重启过了，但问题还是没有解决。回复 2# jiaoruijun

作者: 119beyond 时间: 2013-09-12 09:14
上EMC上看看，有什么告警或者是有什么异常的

作者: lisa_won 时间: 2013-09-12 15:49
装powerpath了吗？powermt displasy dev=all看看

作者: Jack_chen881012 时间: 2013-09-12 17:09
还没有装powerpath。回复 5# lisa_won

作者: 119beyond 时间: 2013-09-12 20:53
用EMC的存储，基本的软件是要装的，要不怎么定位故障

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)