标题: pearpc的配置 [打印本页] 作者: loki123 时间: 2004-09-19 21:49 标题: pearpc的配置 ## PearPC Configuration File
## Created with PearGUI
##
## Start Resolution
##
## (clients that use video.x can change the resolution at runtime,
## so this would be used only for starting up)
##
## format: "(width)x(height)x(depth)"
## or "(width)x(height)x(depth)@(frequency)"
##
## depth can only be 15 or 32
##
## default: "800x600x15"
##
ppc_start_resolution = "800x600x32@80"
##800x600 32位色深 80hz刷新
##
## Redraw interval (in ms)
## must be between 10 and 500
##
## If you set this higher, PearPC will spend less time doing redraws (and so run faster) but feel
## less responsive. You should adjust this to your computer speed and personal preference.
##
redraw_interval_msec = 50
##
## Loader
##
##
## Boot method
## this can be
## 1. auto, prom will boot the first bootable partition found (default)
## 2. select, prom will show you a list of bootable partitions
## 3. force, prom will load and boot the local file prom_loadfile
##
prom_bootmethod = "select"
## Example of how to use force:
##prom_bootmethod = "force"
##prom_loadfile = "test/yaboot"
##prom_env_bootpath = "disk"
##
## bootargs: don't change unless you know what you are doing
## machargs: set to "-v" to get a verbose startup
##
prom_env_bootargs = ""
prom_env_machargs = "-v"
##
## This is needed if you want to boot Mac OS X
##
prom_driver_graphic = "K:\pearpc04pre\video.x"
## This will adjust the position of the initial page table (don't change)
##page_table_pa = 104857600
##
## CPU Config
##
## Processor Version Register
## Defaults to 0x00088302
## Only change if you know want you are doing
##
#cpu_pvr = 0x00088302
##
## Main memory (default 128 MiB)
## must be >;= 64 MiB
##
memory_size=0x18000000
##内存为384m 这里是十六进制
##
## IO Devices
##
##
## PCI IDE Config
##
## Drive type will be set according to file extension:
## .img: Harddisk (filesize must be multiple of 516096)
## .iso: CD-Rom
## Or you can override this by specifying the type via
## pci_ide0_master_type / pci_ide0_slave_type