setting hpux path(\EFI\HPUX)...
type 'fs[x]:' where x is your bootdisk (0, 1, 2...)
type 'hpux' to start hpux bootloader
Shell> fs0:
fs0:\> HPUX
(C) Copyright 1999-2011 Hewlett-Packard Development Company, L.P.
All rights reserved
HP-UX Boot Loader for IPF -- Revision 2.043
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 9
Type 'help' for help
HPUX> boot vmunix -is
> System Memory = 8169 MB
loading section 0
........................................................................ (complete)
loading section 1
................. (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
................................
================================================================================
WARNING: Multiple console output devices are configured. If this message
remains on the screen for more than a few minutes, then this is not the
device in use by HP-UX as the console output device. If you would like this
device to be the one used by HP-UX as the console output device, reboot and
use the EFI boot manager or the EFI 'conconfig' command to select this device
and deconfigure the others.
================================================================================
Console is on Serial Device - via PCDP
Booting kernel...
Loaded ACPI revision 2.0 tables.
Using /stand/ext_ioconfig
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 7769 MB 7769 MB 7769 MB
Kernel : 7769 MB 7769 MB 7769 MB
User : 7036 MB 6238 MB 6262 MB
-------------------------------------------------------------------------
ktracer is off until requested.
Enabling spinlock ALAT switching
Installing Socket Protocol families AF_INET and AF_INET6
Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 10.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 11.
NOTICE: cachefsc_install: cachefs File system was registered at index 13.
Boot device's HP-UX HW path is: 0/1/1/0.0x1c2b28e81590ba0.0x0
System Console is on the Built-In Serial Interface
igelan0: INITIALIZING HP PCI-X 1000Base-T Dual-port Built-in at hardware path 0/1/2/0
iether2: INITIALIZING HP AD337-60001 PCIe 1000Base-T Dual-port Adapter at hardware path 0/4/0/0/0/0
iether3: INITIALIZING HP AD337-60001 PCIe 1000Base-T Dual-port Adapter at hardware path 0/4/0/0/0/1
igelan1: INITIALIZING HP PCI-X 1000Base-T Dual-port Built-in at hardware path 0/1/2/1
AF_INET socket/streams output daemon running, pid 49
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
Checking root file system.
log replay in progress
replay complete - marking super-block as CLEAN
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B.11.31_LR FLAVOR=perf
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 8365980 Kbytes, lockable: 5961804 Kbytes, available: 6780516 Kbytes
/sbin/ioinitrc:
/dev/vg00/lvol1:log replay in progress
/dev/vg00/lvol1:replay complete - marking super-block as CLEAN
/sbin/krs_sysinit:
* The module 'rng' has been loaded.
* The module 'gvid_info' has been loaded.
insf: Installing special files for ipmi instance 0 address 250/0
insf: Installing special files for pseudo driver framebuf
INIT: Overriding default level with level 's'
Boot Authentication:
Please enter your login name:
Please enter your login name:
Please enter your login name:
Please enter your login name:
