Chinaunix

标题: fdisk分区问题 [打印本页]

作者: calflyok 时间: 2016-10-12 11:37
标题: fdisk分区问题
[root@localhost ~]# fdisk -l

Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a2100

Device Boot    Start       End    Blocks Id  System
/dev/sda1 *          1       39    307200 83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2             39       2093 16501760 83  Linux
/dev/sda3          2093       2610    4154841 5  Extended
/dev/sda5          2093       2106    106429+  83  Linux
/dev/sda6          2107       2120    112423+  83  Linux
/dev/sda7          2121       2134    112423+  83  Linux
/dev/sda8          2135       2148    112423+  83  Linux
/dev/sda9          2149       2162    112423+  83  Linux
/dev/sda10          2163       2424    2104483+  83  Linux

用fdisk创建了上面的分区，并已w，partprobe,然后，mdadm是提示mdadm: device /dev/sda5 not suitable for any style of array，然后查看/dev得到如下结果，没有sda5-10.

[root@localhost ~]# ls /dev|grep sda
sda
sda1
sda2
sda3

[root@localhost ~]# mkfs -t ext4 /dev/sda5
mke2fs 1.41.12 (17-May-2010)
Could not stat /dev/sda5 --- No such file or directory

The device apparently does not exist; did you specify it correctly?

咋回事呢？谢谢

作者: calflyok 时间: 2016-10-13 11:34
苦等ing。。。

作者: wlforyou1 时间: 2016-10-13 18:00
你df -ih后，然后截图我看下。

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)