Summary:
Tape at hardware path 0/0/8/0/0.2.25.255.0.0.1 : Media failure
Description of Error:
The device was unsuccessful in reading data for the current I/O request
because it could not find the requested recorded entity on the medium. The
request may have been processed in a way which could cause damage to or
loss of data.
For furthur isolation of the problem, it may be possible that the
combination of values of Sense Code, Sense Qualifier and Sense Key may be
vendor specific. In that case, please contact the manufacturer of the
device. It may also be possible that the combination of SCSI Sense
Code/Qual/Key was not intended to be used by this type of device.
Probable Cause / Recommended Action:
Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is
removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced
a hardware failure. Contact your HP support representative to have the
device checked.
Additional Event Data:
System IP Address...: 172.20.4.48
Event Id............: 0x41c7c40500000000
Monitor Version.....: B.01.05
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_dm_stape.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
0x41c7c40500000000
Additional System Data:
System Model Number.............: 9000/800/S16K-A
OS Version......................: B.11.11
System Firmware Version.........: 16.9
System Serial Number............: SGH4307110
System Software ID..............: 450226618
EMS Version.....................: A.03.20
STM Version.....................: A.35.00
System Current Product Number...: A6093A
System Original Product Number..: A6093A
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/scsi.htm#100243
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
SCSI Status...: CHECK CONDITION (0x02)
Indicates that a contingent allegiance condition has occurred. Any
error, exception, or abnormal condition that causes sense data to be
set will produce the CHECK CONDITION status.
SCSI Sense Data Fields:
Error Code : 0x70
Segment Number : 0x00
Bit Fields:
Filemark : 0
End-of-Medium : 0
Incorrect Length Indicator : 0
Sense Key : 0x03
Information Field Valid : TRUE
Information Field : 0x0000002E
Additional Sense Length : 14
Command Specific : 0x00000000
Additional Sense Code : 0x14
Additional Sense Qualifier : 0x00
Field Replaceable Unit : 0x00
Sense Key Specific Data Valid : FALSE
Sense Key Specific Data : 0x00 0x50 0x90
Sense Key 0x03, MEDIUM ERROR, indicates that the command terminated
with a nonrecovered error condition that was probably caused by a
flaw in the medium or an error in the recorded data. This sense key
may also be returned if the device is unable to distinguish between a
flaw in the medium and a specific hardware failure (sense key 0x04).
The combination of Additional Sense Code and Sense Qualifier (0x1400)
indicates: Recorded entity not found.
SCSI Command Data Block: (not present in log record)
Summary:
Tape at hardware path 0/0/8/0/0.2.25.255.0.0.2 : Hardware failure
Description of Error:
While attempting to write data to its medium, the device encountered a
write error. Data loss may have occurred.
For furthur isolation of the problem, it may be possible that the
combination of values of Sense Code, Sense Qualifier and Sense Key may be
vendor specific. In that case, please contact the manufacturer of the
device. It may also be possible that the combination of SCSI Sense
Code/Qual/Key was not intended to be used by this type of device.
Probable Cause / Recommended Action:
The device has experienced a hardware failure. Contact your HP support
representative to have the device checked.
Additional Event Data:
System IP Address...: 172.20.4.48
Event Id............: 0x41c7bc9500000000
Monitor Version.....: B.01.05
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_dm_stape.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
0x41c7bc9500000000
Additional System Data:
System Model Number.............: 9000/800/S16K-A
OS Version......................: B.11.11
System Firmware Version.........: 16.9
System Serial Number............: SGH4307110
System Software ID..............: 450226618
EMS Version.....................: A.03.20
STM Version.....................: A.35.00
System Current Product Number...: A6093A
System Original Product Number..: A6093A
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/scsi.htm#100084
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
SCSI Status...: CHECK CONDITION (0x02)
Indicates that a contingent allegiance condition has occurred. Any
error, exception, or abnormal condition that causes sense data to be
set will produce the CHECK CONDITION status.
SCSI Sense Data Fields:
Error Code : 0x70
Segment Number : 0x00
Bit Fields:
Filemark : 0
End-of-Medium : 0
Incorrect Length Indicator : 0
Sense Key : 0x03
Information Field Valid : FALSE
Information Field : 0x00000000
Additional Sense Length : 14
Command Specific : 0x00000000
Additional Sense Code : 0x0C
Additional Sense Qualifier : 0x00
Field Replaceable Unit : 0x00
Sense Key Specific Data Valid : FALSE
Sense Key Specific Data : 0x00 0x75 0x0F
Sense Key 0x03, MEDIUM ERROR, indicates that the command terminated
with a nonrecovered error condition that was probably caused by a
flaw in the medium or an error in the recorded data. This sense key
may also be returned if the device is unable to distinguish between a
flaw in the medium and a specific hardware failure (sense key 0x04).
The combination of Additional Sense Code and Sense Qualifier (0x0C00)
indicates: Write error (sense key indicates whether recovered).
SCSI Command Data Block: (not present in log record)