Chinaunix

标题: Solaris8启动报错：couldn't set locale correctly [打印本页]

作者: 心耘 时间: 2005-10-27 10:37
标题: Solaris8启动报错：couldn't set locale correctly
screen not found.
keyboard not found.
Keyboard not present.  Using ttya for input and output.

Sun Fire 280R (2 X UltraSPARC-III+) , No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.5, 2048 MB memory installed, Serial #53448422.
Ethernet address 0:3:ba:2f:8e:e6, Host ID: 832f8ee6.

Initializing Memory -
Rebooting with command: boot -r
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e010b8f601,0:a  File and args: -r
SunOS Release 5.8 Version Generic_117350-12 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
configuring IPv4 interfaces: eri0.
Hostname: s1
metainit: s1: there are no existing databases

Configuring /dev and /devices
/kernel/drv/sparcv9/fcsm: undefined symbol 'fc_ulp_get_port_login_params'
WARNING: mod_load: cannot load module 'fcsm'
couldn't set locale correctly
Configuring the /dev directory (compatibility devices)
The system is coming up.  Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s6: is clean.
/dev/rdsk/c1t0d0s7: is clean.
starting rpc services: rpcbind
couldn't set locale correctly
done.
Setting netmask of eri0 to 255.255.255.224
Setting default IPv4 interface for multicast: add net 224.0/4: gateway s1
syslog service starting.
couldn't set locale correctly
couldn't set locale correctly
couldn't set locale correctly
Print services started.
Oct 26 20:27:29 s1 sendmail[248]: My unqualified host name (s1) unknown; sleeping for

retryvolume management starting.
couldn't set locale correctly
The system is ready.
s1 console login: Oct 26 20:28:29 s1 sendmail[248]: unable to qualify my own domain name

登陆系统之后增加用户也有这样的错误：
root@s1 # useradd -m -d /usr/zhou -s /bin/csh -g staff zhou
couldn't set locale correctly
couldn't set locale correctly
64 blocks
couldn't set locale correctly
couldn't set locale correctly
兄弟我菜鸟一个，请各位帮忙了！

作者: hjp1973 时间: 2005-10-27 11:11
标题: Solaris8启动报错：couldn't set locale correctly
1\couldn't set locale correctly
备份/etc目录然后运行sys-unconfig命令重新设定即可!

2\s1 console login: Oct 26 20:28:29 s1 sendmail[248]: unable to qualify my own domain name
编辑/etc/hosts文件,在以本主机名开始的那行的第二字段后加s1.net(前后用TAB隔开)
比如将
192.168.0.1 s1 loghost
改为
192.168.0.1 s1 s1.net loghost

作者: 心耘 时间: 2005-11-02 13:41
谢谢hjp1973 。

作者: jiangping 时间: 2005-11-02 14:28

原帖由 hjp1973 于 2005-10-27 11:11 发表
1couldn't set locale correctly
备份/etc目录然后运行sys-unconfig命令重新设定即可!

2s1 console login: Oct 26 20:28:29 s1 sendmail[248]: unable to qualify my own domain name
编辑/etc/hosts文件 ...

是不是安装系统时启用了DNS就会有这样的错误呢?

另:
运行sys-unconfig这个命令不是很危险吗,后果...会怎么样啊???

请明示!!!

作者: Xstar 时间: 2005-11-02 14:49
好像是所有配置重新配吧，就跟你重装OS似的，但应用这些文件不会丢失。

作者: ubuntu590 时间: 2005-11-02 15:07
linux上也有这个命令，我试过一次，也就是重新配置一下系统，没什么的。

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)