Chinaunix

标题: sco unix在vlan中另一網段不能連接的問題. [打印本页]

作者: 小小蚊子 时间: 2006-02-16 13:32
标题: sco unix在vlan中另一網段不能連接的問題.
網絡通過cisco 3560劃分了兩個vlan.(分別為:192.168.2.*和192.168.3.*)

現在出了問題:192.168.3.*的終端不能連接sco unix主機(sco unix的IP為:192.168.2.11),ping都不通.

而192.168.3.*的電腦連接192.168.2.*中的其它電腦卻正常.(只有這台sco unix主機不通

.)

請大家指點....

作者: 小小蚊子 时间: 2006-02-16 13:38
補充說明:sco unix主機的netmask,gateway的設置與其它192.168.2.*的電腦一樣.

作者: xy-coordinate 时间: 2006-02-16 15:05
要加路由！

到cisco论坛去看看！

作者: 小小蚊子 时间: 2006-02-16 15:40
但同樣的,192.168.3.*中的主機卻能與另一台Red Hat 主機(IP為:192.168.2.5)連接.

作者: ryan_lee 时间: 2006-02-16 16:51
是基于802。1Q的vlan划分的么？

作者: 小小蚊子 时间: 2006-02-17 11:41
這是在cisco 3560交換機上show confi...

做的很簡單,大家幫忙看看...哪裡不對???

Switch#show configuration
Using 2829 out of 524288 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
enable secret 5 $1$p31R$6m8Ht4X4WOw9L0ne9puzY1
!
no aaa new-model
ip subnet-zero
ip routing
!
!
!
!
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
interface GigabitEthernet0/1
switchport access vlan 2
switchport mode access
!
interface GigabitEthernet0/2
switchport access vlan 2
switchport mode access
!
interface GigabitEthernet0/3
switchport access vlan 2
switchport mode access
!
interface GigabitEthernet0/4
switchport access vlan 2
switchport mode access
!
interface GigabitEthernet0/5
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/6
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/7
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/8
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/9
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/10
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/11
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/12
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/13
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/14
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/15
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/16
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/17
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/18
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/19
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/20
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/21
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/22
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/23
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/24
switchport access vlan 3
switchport mode access
!
interface GigabitEthernet0/25
!
interface GigabitEthernet0/26
!
interface GigabitEthernet0/27
!
interface GigabitEthernet0/28
!
interface Vlan1
no ip address
shutdown
!
interface Vlan2
ip address 192.168.3.254 255.255.255.0
!
interface Vlan3
ip address 192.168.2.254 255.255.255.0
!
ip default-gateway 192.168.2.250
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.2.250
ip http server
!
!
control-plane
!
!
line con 0
line vty 0 4
password
login
line vty 5 15
password
login
!
!
end

作者: 4w. 时间: 2006-02-17 12:47
首先，三层交换机上，给VLAN配置了IP地址，VLAN之间就已经可以互相通讯了。SCO UNIX需要加条路由，你可以在/etc/rc2.d下面编辑一个文件如：S85tcp。内容如下：
route add xxx.xxx.xxx.0 –netmask 255.255.255.0 xxx.xxx.xxx.xxx

作者: yangyyg_y 时间: 2006-02-24 08:29
在/etc/rc2.d建S96gateway
route add default XXX.XXX.XXX.XXX 1

作者: saintdragon 时间: 2006-02-24 09:24
路由的问题

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)