原帖由 孤城 于 2006-3-4 00:18 发表
在grub里面用,
map hda hdb
map hdb hda
用info grub看看,应该可以找到你要的
原帖由 connet 于 2006-3-10 22:45 发表
kernel /vmlinuz-2.6.11-1.1369_FC4 ro root=/dev/hdb5 rhgb quiet
系统都在硬盘上,启动 linux 根本不需要搞那么多 map,简单的东西搞复杂了,直接制定 root 即可,因为你安装时,系统写的fstab 都没考虑map ...
原帖由 kelela 于 2006-3-10 23:34 发表
用map-driver参数,很久以前我在linuxaid上看过
现在的问题就是开机后用装在hda上的grub引导,其它系统都能引导,可到FC4就会
mount:error 6 mounting ext3
Error opening /dev/console !!!!:2
error dup2ling fd of 0 to 0
error dup2ling fd of 0 to 1
error dup2ling fd of 0 to 2
Switchroot:mount failed:22
Kernel panic-not syncing:Attemped to kill init!
原帖由 lunchan 于 2006-3-19 00:04 发表
FC4的核心已經載入了,不是grub的問題
反而覺得是FC4的fstab問題,有調錯了沒?
原帖由 phpman 于 2006-3-19 23:12 发表
启动hda上的Linux系统后,fsck /dev/hdb3 和/dev/hdb5
hdb上的lable改成实际设备 /dev/hdb3应该是/boot的吧? /dev/hdb5 应该是 /的吧?
欢迎光临 Chinaunix (http://bbs.chinaunix.net/) | Powered by Discuz! X3.2 |