Chinaunix

标题: 如何确定4900的光驱物理路径 [打印本页]

作者: 昵称不要起太长 时间: 2006-06-03 11:54
标题: 如何确定4900的光驱物理路径
ok boot cdrom
ERROR: Can't open boot-device

ok devalias
Alias                Device Path
--------------------------------------------------
xdisk                /ssm@0,0/pci@1d,700000/SUNW,qlc@1/fp@0,0/disk@0,0
xnet                /ssm@0,0/pci@1d,600000/network@2
diskc                /ssm@0,0/pci@1c,700000/pci@1/SUNW,isptwo@4/sd@0,0
netc                /ssm@0,0/pci@1c,700000/pci@1/SUNW,hme
cdrom                /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@6,0:f
disk                /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@0,0
disk0                /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@0,0
disk1                /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@1,0
disk2                /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@2,0
disk3                /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@3,0
disk4                /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@4,0
disk5                /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@5,0
def-cn             /sgcn
diskifp             /ssm@0,0/pci@19,700000/SUNW,ifp@1/ssd@0,0
diskglm             /ssm@0,0/pci@18,700000/scsi@2/disk@0,0
scsi                /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo
net                /ssm@0,0/pci@18,700000/pci@1/SUNW,hme

{10} ok boot /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@6,0:f
ERROR: Can't open boot-device

作者: 昵称不要起太长 时间: 2006-06-03 12:05
ok probe-scsi-all

/ssm@0,0/pci@1d,700000/SUNW,qlc@1
Fibre Channel link not ready - Loss of Sync
Fibre Channel link down

/ssm@0,0/pci@19,700000/SUNW,qlc@1
Fibre Channel link not ready - Loss of Sync
Fibre Channel link down

/ssm@0,0/pci@18,600000/pci@2/scsi@2,1

/ssm@0,0/pci@18,600000/pci@2/scsi@2
Target 0
  Unit 0 Disk    SEAGATE ST373207LSUN72G 045A
Target 1
  Unit 0 Disk    SEAGATE ST373207LSUN72G 045A
Target 2
  Unit 0 Processor    Sun    D240          1.09
Target 3
  Unit 0 Processor    Sun    D240          1.09
Target 4
  Unit 0 Removable Tape    HP    C7438A       ZP5A
Target 6
  Unit 0 Removable Read Only device TSSTcorpDVD-ROM TS-H352CSI00

作者: 长得很幽默 时间: 2006-06-03 12:14
boot /ssm@0,0/pci@18,600000/pci@2/scsi@2/disk@6,0:f

作者: metor78 时间: 2006-06-03 16:35
cdrom /ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@6,0:f

作者: gangse 时间: 2006-06-03 23:10
光区物理地址应该以PROBE-SCSI扫描到的为准吧，

/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/sd@6,0:f 别名里是定义这个
扫描到的是/ssm@0,0/pci@18,600000/pci@2/scsi@2

这个物理地址和定义的有所区别

作者: wwxipconfig 时间: 2006-06-04 12:57
boot /ssm@0,0/pci@18,600000/pci@2/SUNW,isptwo@4/sd@6,0:f

作者: aping2005 时间: 2006-06-04 14:34
看SUN公司的圣经去

作者: 骑猪看日出 时间: 2006-06-04 17:32
show－disks 看下，比较准，前一阵刚搞过，4900上面接240 和平时的机器不太一样。。

推荐幽默兄的路径：）

作者: nimysun 时间: 2006-06-04 21:31
去看手册吧

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)