Chinaunix

标题: Debian下安装Cadence-Allegro-SPB15.5手记 [打印本页]

作者: ymhu 时间: 2006-06-14 10:20
标题: Debian下安装Cadence-Allegro-SPB15.5手记
参考wheel的帖子，我在Debian-sarge下成功安装allegro-spb15.5，以下是具体安装步骤：

.0, 从soft.eeatech.org:31621上下载五个iso文件
.1, 我的系统是 Debian sarge
.2, su root
cd /mnt
mkdir cdrom-1
mount -t iso9660 -o loop path-to-iso/cd1.iso /mnt/cdrom-1
mkdir cdrom-2
mount -t iso9660 -o loop path-to-iso/cd2.iso /mnt/cdrom-2
mkdir cdrom-3
mount -t iso9660 -o loop path-to-iso/cd3.iso /mnt/cdrom-3
mkdir cdrom-4
mount -t iso9660 -o loop path-to-iso/cd4.iso /mnt/cdrom-4
mkdir cdrom-5
mount -t iso9660 -o loop path-to-iso/cd5.iso /mnt/cdrom-5

cd /mnt/cdrom-1
./SETUP.SH
提示 Specify path of install directory [OR type [RETURN] to exit]:/opt/spb155
提示 Directory /opt/spb does not exist. Create? [y/n]:y
提示 Do you want to use InstallScape [y/n]:n
提示 Do you want to start softload? [y/n]:n
cd /opt/spb155/install/bin.lnx86
./softload
Press [Return] to proceed, q to quit :回车
现在开始安装软件

选 1-1-2-/mnt/cdrom-1
提示 Please press y (yes) or n (no) :n
选 4) Cadence Catalog
再选 a
再选 y
提示 The following media is required:

   SPB155 lnx86 P/N 356-73303-0101 CDROM # 1
   SPB155 lnx86 P/N 356-73303-0102 CDROM # 2
   SPB155 lnx86 P/N 356-73303-0103 CDROM # 3
   SPB155 lnx86 P/N 356-73303-0104 CDROM # 4
   SPB155 lnx86 P/N 356-73303-0105 CDROM # 5

   Press [Return] to proceed, q to quit :回车

选 4-1-2-/mnt/cdrom-2
选 4-1-2-/mnt/cdrom-3
选 4-1-2-/mnt/cdrom-4
选 4-1-2-/mnt/cdrom-5

安装完毕后，键入 Q 退出。

.3, cd /opt/spb155
ln -s tools.lnx86 tools

.4, su ymhu(note: ymhu 是一系统用户)
cd ~
gedit .bashrc
将下述内容拷贝到 .bashrc 文件的末尾：

# Cadence SPB environment
export CDS_INST_DIR=/opt/spb155
export CDS_LIC_FILE=$CDS_INST_DIR/share/license.lic
export CDS_DIR=$CDS_INST_DIR
export CONCEPT_INST_DIR=$CDS_DIR
export CDS_SITE=$CDS_DIR/share/local/
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH

CONCEPT_INST_DIR/tools/lib
export CDSDOC_PROJECT=/CDS_INST_DIR/doc
export PATH=$PATH

CDS_INST_DIR/tools/jre/bin

CONCEPT_INST_DIR/tools/bin

CONCEPT_INST_DIR/tools/pcb/bin

CONCEPT_INST_DIR/tools/fet/bin

将 cdrom-1 中的/crack/license.lic文件拷贝到/opt/spb155/share目录下，并确认文件的读写权限。重新启动系统，一切大功告成。

.5, 使用软件
allegro_design_entry_HDL & (启动Concept-HDL画原理图)
allegro & (启动PCB布线程序，会有一个选择Cadence产品的列表，我习惯用Allegro PCB Design 620)
allegro_package_designer & (画PCB封装，我习惯用Allegro Package Designer 620)
projmgr &
问题是：为什么 linux 下的 spb155 不能用 capture 画原理图？

[ 本帖最后由 ymhu 于 2006-6-14 10:43 编辑 ]

作者: selenenob1 时间: 2006-08-25 17:59
我全装好了,可是跑不起来.一点反映都没有!这是为石墨?
我的.bashrc如下.
# Cadence SPB environment
export CDS_INST_DIR=/opt/spb
export CDS_LIC_FILE=$CDS_INST_DIR/share/license.lic
export CDS_DIR=$CDS_INST_DIR
export CONCEPT_INST_DIR=$CDS_DIR
export CDS_SITE=$CDS_DIR/share/local/
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH
$CONCEPT_INST_DIR/tools/lib
export CDSDOC_PROJECT=/CDS_INST_DIR/doc
export PATH=/opt/spb/tools/jre/bin
$CONCEPT_INST_DIR/tools/bin
$CONCEPT_INST_DIR/tools/pcb/bin
$CONCEPT_INST_DIR/tools/fet/bin

[ 本帖最后由 selenenob1 于 2006-8-25 18:04 编辑 ]

作者: wheel 时间: 2006-10-13 16:46
你是装到/opt/spb下吗？
export CDS_INST_DIR=/opt/spb
export CDS_ROOT=/opt/IC5141
export CDS_INSTALL_DIR=$CDS_INST_DIR/tools/dfII:$CDS_ROOT/tools/dfII
export CDS_LIC_FILE=$CDS_INST_DIR/share/cadence.license:$CDS_ROOT/share/license/license.dat
export CDS_DIR=$CDS_INST_DIR:$CDS_ROOT
export CONCEPT_INST_DIR=$CDS_INST_DIR
export CDS_SITE=$CDS_INST_DIR/share/local/
export LD_LIBRARY_PATH=$CDS_INST_DIR/tools/lib:$CDS_ROOT/tools/lib
export CDSDOC_PROJECT=$CDS_INST_DIR/doc:$CDS_ROOT/doc
export PATH=$CDS_INST_DIR/tools/bin:$CDS_INST_DIR/tools/pcb/bin:$CDS_INST_DIR/tools/fet/bin:$CDS_INST_DIR/tools/dfII/bin:$CDS_ROOT/tools/bin:$CDS_ROOT/tools/dfII/bin:$CDS_ROOT/tools/spectre/bin:$PATH
export CDS_Netlisting_Node Analog
export LD_ASSUME_KERNEL=2.4.19
#allegro &allegro_design_entry_HDL &projmgr &

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)