Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label [node1_boot]
* Network Type [ether] +
* Network Name [node_net] +
* Network Attribute public +
* Adapter Function boot +
Adapter Identifier [10.1.1.2]
Adapter Hardware Address []
Node Name [node_node1] +
Add an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label [node1_svc]
* Network Type [ether] +
* Network Name [node_net] +
* Network Attribute public +
* Adapter Function service +
Adapter Identifier [10.1.1.4]
Adapter Hardware Address []
Node Name [node_node1] +
Add an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label [node1_stby]
* Network Type [ether] +
* Network Name [node_net] +
* Network Attribute public +
* Adapter Function standby +
Adapter Identifier [202.1.1.2]
Adapter Hardware Address []
Node Name [node_node1] +
Add an Adapter
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
* Adapter IP Label [node1_serial]
* Network Type [rs232] +
* Network Name [node_tty] +
* Network Attribute serial +
* Adapter Function service +
Adapter Identifier [/dev/tty0]
Adapter Hardware Address []
Node Name [node_node1] +作者: Chinese_Dragon 时间: 2003-05-27 18:14 标题: 关于IBM的HACMP的一个问题,很瘪 10.1.1.2 node1_boot node1 boot IP
10.1.1.4 node1_svc Service IP
202.1.1.2 node1_stby stand by IP作者: 宇轩 时间: 2003-05-28 08:41 标题: 关于IBM的HACMP的一个问题,很瘪 boot IP
Service IP
stand by IP
各自连接到什么设备?boot ip是连接到hub或switch上吗?作者: ibm6000 时间: 2003-05-28 09:10 标题: 关于IBM的HACMP的一个问题,很瘪 网卡1:boot service
网卡2:standby作者: 宇轩 时间: 2003-05-28 09:12 标题: 关于IBM的HACMP的一个问题,很瘪 为什么网卡1上要配置两个ip地址呢?不懂。