标题: 请教fcmsutil [打印本页] 作者: liujie3 时间: 2007-02-01 10:48 标题: 请教fcmsutil 请问fcmsutil /dev/td1 get remote all 和 fcmsutil /dev/td0 replace_dsk 0x11900 命令的具体含义是什么？
另外fcmsutil /dev/td1 get remote all 中看到的 Target N_Port_id is = 0x011900 中的 0x011900和 fcmsutil /dev/td0 replace_dsk 0x11900 中的0x11900 有什么联系？作者: mountin 时间: 2007-02-05 13:59
fcmsutil /dev/tdx get remote all
If the all argument is specified for
the remote option, login parameters and current states
of all N_Ports that the initiator is aware of, are
displayed. The all option is supported only by TACHYON
TL, TACHYON XL2, FCD Driver-Based, and FC/GigE Combo
cards.作者: mountin 时间: 2007-02-05 14:25
fcmsutil /dev/td0 replace_dsk 0x11900
This option is used to specify that no authentication
should be performed the next time we communicate with
the device. This option is to be used by system
administrators for replacing a disk, with another (with
the same N_Port_ID). Note that this is not required,
if the new disk acquires a new N_Port_ID.
This option is supported only by TACHYON TL, TACHYON
XL2, FCD Driver-Based, and FC/GigE Combo cards.作者: david_jwm 时间: 2007-03-30 13:40
就是更换了硬盘或者控制器后，npID改变了，需要重新识别设备，不然就无法使用新的设备！作者: lihaocheng 时间: 2008-10-19 02:14
Nport不变，是wwn变吧?!