Chinaunix

标题: 一个老问题，SUN Cluster 3.0 NAFO是不是一定要配置两个交换机 [打印本页]

作者: bencyber 时间: 2007-03-15 11:19
标题: 一个老问题，SUN Cluster 3.0 NAFO是不是一定要配置两个交换机
如题，如果只有一个交换机划成两个VLAN行不行呢？
这两种方式有什么区别？

作者: 东方蜘蛛 时间: 2007-03-15 11:27

原帖由 bencyber 于 2007-3-15 11:19 发表
如题，如果只有一个交换机划成两个VLAN行不行呢？
这两种方式有什么区别？

划两个VLAN和用两个交换机一样的效果吧，就是少了冗余了！NAFO怎么了？

PS:6140添加license搞定啦

作者: briangao 时间: 2007-03-15 11:42
If you use only one switch, why do you create two VLANs for NAFO? NAFO is the old-time IPMP. The two NICs in it should belong to the same network. You use two switches for redundancy. If you only have one switch, put both NICs on the same VLAN.

作者: bencyber 时间: 2007-03-15 11:48
PS:6140添加license搞定啦

[/quote]

怎么处理的

作者: bencyber 时间: 2007-03-15 11:55

原帖由 briangao 于 2007-3-15 11:42 发表
If you use only one switch, why do you create two VLANs for NAFO? NAFO is the old-time IPMP. The two NICs in it should belong to the same network. You use two switches for redundancy. If you only h ...

My big customer has many applications with cluster 3.0, and the NAFO made up of two network adapters,I known Sun recommanded to config two switches,if as you said,NAFO switch between two NICs may be unsuccessful。

作者: 东方蜘蛛 时间: 2007-03-15 11:56

原帖由 bencyber 于 2007-3-15 11:48 发表
PS:6140添加license搞定啦

怎么处理的 [/quote]

我被license中心的人给玩了，给我的Version number是1.0，结果死活不行，后来用1就ok啦

作者: briangao 时间: 2007-03-15 11:58

My big customer has many applications with cluster 3.0, and the NAFO made up of two network adapters,I known Sun recommanded to config two switches,if as you said,NAFO switch between two NICs may be unsuccessful。

fair enough. Then there is not need to create the second VLAN on the switch. Both NICs go to the same VLAN.

作者: bencyber 时间: 2007-03-15 13:43

原帖由 briangao 于 2007-3-15 11:58 发表
fair enough. Then there is not need to create the second VLAN on the switch. Both NICs go to the same VLAN.

Thanks a lots.

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)