Chinaunix

标题: Samba新手问题 [打印本页]

作者: nirvana 时间: 2007-07-04 16:51
标题: Samba新手问题
用源码方式在RHEL 4上安装了Samba 3.0.25b的版本! 安装时除了./configure时看到一些no的提示外, make ,make install都无错误提示

然后以/usr/local/samba/smbd -D  /usr/local/samba/nmbd -D启动,但是不确定服务是否启动还是根本没装好,请教校验方法!谢谢!

[root@EXPED samba]# /usr/local/samba/sbin/smbd -D
[root@EXPED samba]# /usr/local/samba/sbin/nmbd -D
[root@EXPED samba]# testparm  /etc/samba/smb.conf
Load smb config files from /etc/samba/smb.conf
Processing section "[homes]"
Processing section "[printers]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions

# Global parameters
[global]
      workgroup = EXPED
      server string = Samba Server
      security = SHARE
      log file = /var/log/samba/%m.log
      max log size = 50
      socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
      printcap name = /etc/printcap
      dns proxy = No
      idmap uid = 16777216-33554431
      idmap gid = 16777216-33554431
      cups options = raw

[homes]
      comment = Home Directories
      read only = No
      browseable = No

[printers]
      comment = All Printers
      path = /var/spool/samba
      printable = Yes
      browseable = No
[root@EXPED samba]#

作者: ireneonojc 时间: 2007-07-06 08:16
# /usr/local/samba/bin/smbclient –L yourIP
就能看能不能用了

作者: csws 时间: 2007-07-06 09:31
rpm -qa | grep samba
看rpm包裝好沒

service smb restart
看能否正常啟動

作者: nirvana 时间: 2007-07-06 14:34
改用/usr/local/samba/smbd &
/usr/local/samba/nmbd &这种命令后可以看到有进程号,可惜进程马上退出,看来配置上还是有问题

[root@EXPED ~]# /usr/local/samba/sbin/nmbd &
[1] 15640
[root@EXPED ~]# /usr/local/samba/sbin/smbd &
[2] 15641
[1] Exit 255 /usr/local/samba/sbin/nmbd

现在改研究这个问题谢谢楼上2位

作者: hzq1984 时间: 2007-08-11 15:26
smb://ip地址

欢迎光临 Chinaunix (http://bbs.chinaunix.net/)