免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 2116 | 回复: 1
打印 上一主题 下一主题

V440挂了,郁闷........ [复制链接]

论坛徽章:
1
CU十二周年纪念徽章
日期:2013-10-24 15:41:34
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2014-08-24 15:40 |显示全部楼层 |倒序浏览
一台老机器,运行一直很正常。有一段时间报警,检查是:

MB/BAT         V_BAT         warning (0.59V)

于是,偶给它换了个主板电池,貌似一切正常

过了个把月,突然就挂了,无法开机。接上串口看看:

SC Alert: Host System has Reset

SC Alert: Host System poweron failed due to fault at MB.FF_POK

SC Alert: SC initiating soft host system shutdown aue to fault at MB.V_VCCTM.

SC Alert: SC Request ato power off host.

郁闷,看来无救了。。。

论坛徽章:
1
CU十二周年纪念徽章
日期:2013-10-24 15:41:34
2 [报告]
发表于 2014-08-25 15:08 |显示全部楼层
本帖最后由 flutter 于 2014-08-25 15:18 编辑

欢迎蜘蛛老大现身,偶看到了希望和光明,乌啦啦

1,偶是SUN菜鸟,不懂硬件,换完主板电池就完了,没有作时间同步

这个时间同步,如何作。。。。。。?貌似我做了NTP服务的,求指点。

2,现在如何自检阿,无论正常状态,还是自检开关状态,显示器根本无输出阿。

接上串口如下信息:


SC Alert: Host System has Reset

SC Alert: Host system poweron failed due to fault at MB.FF_POK.

SC Alert: SC initiating soft host system shutdown due to fault at MB.V_VCCTM.

SC Alert: SC Request to Power Off Host.

SC Alert: VOLTAGE_SENSOR @ MB.V_VCCTM has exceeded low soft shutdown threshold.

SC Alert: VOLTAGE_SENSOR @ MB.V_NET0_1V2D has exceeded low soft shutdown threshold.

SC Alert: VOLTAGE_SENSOR @ MB.V_NET1_1V2D has exceeded low soft shutdown threshold.

SC Alert: VOLTAGE_SENSOR @ MB.V_NET0_1V2A has exceeded low soft shutdown threshold.

SC Alert: VOLTAGE_SENSOR @ MB.V_NET1_1V2A has exceeded low soft shutdown threshold.

SC Alert: Host system has shut down.


我怀疑上次电池换得有问题,主板是不是彻底没有电了,所以无法开机。。。

求大神们给个思路。
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP