关于一个检查mc集群配置文件的报错，请帮忙给看一下

zyfromzero

配置了一个集群配置文件cluster.ascii，然后check，apply，如下输出：

rx3600-2#[/etc/cmcluster]cmcheckconf -k -v -C /etc/cmcluster/cluster.ascii
Begin cluster verification...
Checking cluster file: /etc/cmcluster/cluster.ascii.
MAX_CONFIGURED_PACKAGES configured to 3.
Checking nodes ... Done
Checking existing configuration ... Done
MAX_CONFIGURED_PACKAGES configured to 3.
Gathering storage information
Found 5 devices on node rx3600-2
Found 5 devices on node rx3600-3
Analysis of 10 devices should take approximately 2 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Found 3 volume groups on node rx3600-2
Found 3 volume groups on node rx3600-3
Analysis of 6 volume groups should take approximately 1 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Gathering network information
Beginning network probing (this may take a while)
Completed network probing
Node rx3600-2 did not receive an ICMP REPLY message on 10.0.6.241
from the polling target 10.0.0.1
Node rx3600-3 did not receive an ICMP REPLY message on 10.0.6.212
from the polling target 10.0.0.1
Failed to evaluate polling targets
cmcheckconf: Unable to reconcile configuration file /etc/cmcluster/cluster.ascii
with discovered configuration information.

rx3600-2#[/etc/cmcluster]vgchange -a y vglock
Activated volume group.
Volume group "vglock" has been successfully changed.

rx3600-2#[/etc/cmcluster]cmapplyconf -k -v -C /etc/cmcluster/cluster.ascii
Begin cluster verification...
Checking cluster file: /etc/cmcluster/cluster.ascii
MAX_CONFIGURED_PACKAGES configured to 3.
check_cdsf_group, no cdsf group specified.
Checking nodes ... Done
Checking existing configuration ... Done
MAX_CONFIGURED_PACKAGES configured to 3.
Note: -k option specified, only the lvm volume groups
mentioned in the cluster configuration file will be checked.
To remove lvm volume groups from the cluster,
do not use the -k option.
Gathering storage information
Found 5 devices on node rx3600-2
Found 5 devices on node rx3600-3
Analysis of 10 devices should take approximately 2 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Found 3 volume groups on node rx3600-2
Found 3 volume groups on node rx3600-3
Analysis of 6 volume groups should take approximately 1 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
The volume group /dev/vglock is activated on more than one node:
rx3600-2
rx3600-3
Volume groups should not be activated on more than one node.
Use vgchange to de-activate a volume group on a node.
Gathering network information
Beginning network probing (this may take a while)
Completed network probing
Node rx3600-2 did not receive an ICMP REPLY message on 10.0.6.241
from the polling target 10.0.0.1
Node rx3600-3 did not receive an ICMP REPLY message on 10.0.6.212
from the polling target 10.0.0.1
Failed to evaluate polling targets
cmapplyconf: Unable to reconcile configuration file /etc/cmcluster/cluster.ascii
with discovered configuration information.


不知道是什么原因，请帮忙分析一下，cluster配置文件放到附件中
cluster.zip (6.69 KB, 下载次数: 6)

2013-03-28 09:29 上传

点击文件名下载附件

zyfromzero

ok，多谢了。