sun T5140各种方法都试了就是进不了OK模式该怎么办

DC_楚楚

先不考虑进入到OK，因为你OBP设置了密码，没密码进不到的~ 忘记了就得换PROM了

貌似系统有问题，reset  /SYS 后， start /SP/console 看看完整的引导过程  

DC_楚楚

回复 4# z191837954


    SUN4-8000-0Y - PCI-Express subsystem problem (文档 ID 1021357.1)

DETAILS

Predictive Self-Healing Article
SUN4-8000-0Y - PCI-Express subsystem problem

PCI-Express subsystem problem



Type

Fault
  fault.io.fire.asic
Severity

Critical
Description

A problem was detected in the PCI-Express subsystem.
Automated Response

This fault does not have an automated response agent and thus requires interaction from the user and/or Sun Services.
Impact

Loss of services provided by the device instances associated with this fault
Suggested Action for System Administrator

Schedule a repair procedure to replace the affected device. Use fmdump -v -u EVENT_ID to identify the device or contact Sun for support.

If this message occurs on a Sun Fire T2000 also refer to the NOTE at the end of the Details section below.
Details

The Message ID:  SUN4-8000-0Y indicates an internal parity error has occurred within the hostbridge. Use the fmdump -v -u EVENT_ID command to determine the faulty Field Replaceable Unit (FRU). As shown in the example below, the IOBD is identified as the failing component by the FRU:tag in the fmdump output.
fmdump -v -u f1ae0753-0981-6019-ca62-92125659ce6d
TIME                 UUID                                 SUNW-MSG-ID
Dec 31 21:32:09.6466 f1ae0753-0981-6019-ca62-92125659ce6d SUN4-8000-0Y
  100%  fault.io.fire.asic
         FRU: hc://product-id=SUNW,Sun-Fire-T200/component=IOBD
        rsrc: hc:///ioboard=0/hostbridge=0/pciexrc=1

Have this information available when contacting Sun Services for a repair.
NOTE - If this message occurs on a Sun Fire T2000, it may be because a required parameter has not been set in the /etc/system file. See the Sun Fire T2000 Server Product Notes available at the Sun Documentation Center for details (enter "Sun Fire T2000 Server Product Notes" in the Search Documentation box).

DC_楚楚

回复 4# z191837954


    PCIE卡的报错。
    可以尝试手动清除。

    T5xx0 用ALOM模式登录；

1、创建ALOM用户的方式：
-> create /SP/users/admin role=Administrator cli_mode=alom

2、登录ALOM用户
sc> clearfault uuid

DC_楚楚

liuxitao0728 发表于 2014-08-15 16:36
应该是做过安全加固吧，找找有没有security-mode，关闭security-mode应该就可以了，以前在m5000上遇到过。

这个security-mode也要在OBP下面关闭，现在忘记密码了，就没办法了

DC_楚楚

回复 12# z191837954


    PCIE0 上面插了什么卡，感觉这个槽位凶多吉少了~

   clearfault UUID 以后   showfaults 看看还有没有告警

DC_楚楚

回复 14# z191837954


    等吧，如果再报 就考虑硬件问题，估计是PCIE riser