- 论坛徽章:
- 0
|
中心3845路有器配置\r\n#show run\r\ncontroller E1 1/0\r\n framing NO-CRC4 \r\n channel-group 1 timeslots 1-31\r\n controller E1 1/1\r\n framing NO-CRC4 \r\n channel-group 1 timeslots 1-31\r\n\r\ninterface Serial1/0:1\r\n ip address 192.168.1.4 255.255.255.0\r\n encapsulation ppp\r\n!\r\n # show ip int bri\r\n Interface IP-Address OK? Method Status Protocol\r\n Serial1/0:1 192.168.1.4 YES NVRAM UP down\r\n 地市路由器配置\r\n#show run \r\n controller E1 1/0\r\n framing NO-CRC4 \r\n channel-group 1 timeslots 1-31\r\n!\r\ncontroller E1 1/1\r\n framing NO-CRC4 \r\n channel-group 1 timeslots 1-31\r\n!\r\ninterface Serial1/0:1\r\n ip address 192.168.1.1 255.255.255.0\r\n encapsulation ppp\r\n!\r\n2821#show ip int bri\r\nInterface IP-Address OK? Method Status Protocol\r\nSerial1/0:1 192.168.1.1 YES NVRAM up down \r\n\r\n\r\n\r\n以是我配置,中间走2M,为什么两段协议就是DOWN,老是不通,是我配置有问题了,还是中间2M出问题的了.\r\n我在自己路由器接口上环路起来,看到的现象也和上面一样.\r\n\r\n\r\n麻烦各位指个招吧,谢谢拉!!急 |
|