- 论坛徽章:
- 0
|
系统为FreeBSD 6.2-RELEASE,自己编译过的内核(虽然我感觉跟内核毫无关系这个问题),安装有完全且能正常工作的Xorg 7.3与GNOME 2.20.1,因为ports/packages里的evolution-2.12.1.tbz安装完后,每次启动evolution就出错,而且只有evolution会出错,所以考虑重新编译evolution 2.12.1和evolution-data-server 1.12.1。
在ftp.cn.freebsd.org/pub/FreeBSD/distfiles/gnome2下下载两个tar.bz2,安装了bison,m4后,每次./configure都不能通过libiconv的检测,报告:"checking for iconv ... You need to use a working iconv implementation, such as ftp://ftp.gnu.org/pub/gnu/libiconv",可问题是无论我是否手动编译安装libiconv还是使用.tbz安装后,无论evolution还是evolution-data-server都还是报告找不到iconv,最后甚至都去安装iconv-2.0_1.tbz了都还是不通过。
需要给evolution和evolution-data-server进行修改或补丁吗?希望遇到相同问题的人来讨论一下,解决了问题的人指导一下操作,感激不尽。
>> Problem solved, new patch available for evolution 2.12.1, as to port: evolution-2.12.1_3.
>> That's a known bug for iconv setting files to search for installed iconv on FreeBSD.
>> As to installing new software, it's better to use ports than directly using source tarball on BSD.
>> Sadly, the evolution-2.12.1_3 still crashs when loading... let GNU bugzilla to find out where the problem lays.
[ 本帖最后由 jefferic 于 2007-11-17 15:49 编辑 ] |
|